Thank ef it's not just me that does that! Went to the trouble of changing every hose clamp to 10mm only to get foiled by the missing 10mm socket,...
[ATTACH] [ATTACH] [ATTACH]
The sensor mount is metal and the body is now plastic mould. This is way better as it stop it from rusting or fusing within the hub. For our rear...
My is a 97 also, works fine.
I hear you mate. I maybe do 10k per year in the Galant but service it twice a year other than the auto which is 18 months. Even copper plugs are...
Ford/ Denso Iridium GSP22YE07 These are about $60 set on Ebay and are used on Turbo BA-FG Fords. Genuine Denso plugs pre gapped at .7mm Used them...
Affordable replacement ABS sensors are MR527312 ABS sensor for Lancer. My rear LHS sensor had failed and was causing TCL and AYC issues, shopped...
Anyone looking for aftermarket coil packs can use the following alternatives You will need to seperate your old boot from the coil as the new ones...
I'll definitely do this today. The TCL is the only light tat has ever flashed and that disappears on next start up.
Losing the plot with this one, new set of errors on hard boost only Starting to lean towards a bad connection somewhere around the firewall area...
And it's back! TCL light comes on under different boost conditions, happened boosting at low speeds after backing off the accelerator. Once the...
What a pain in the shfincta this has been. No weird values, all readings are right, air temp coolant and O² sensor. That IPS is a shocker to...
I'll actually go do this now, did it the other day and everything was right. See if the idle position sensor is set right too.
Found traces of coolant, in all inlet pipes, boost pipes but all dry. MAF clean but connector got soaked, didn't use a shop rag while using...
Thanks a bunch for the replies. I was lucky enough to get a new gasket delivered today for the water chamber so got it all out including air box,...
Just an edit to this... Is there a chance the throttle body is now sucking air in from the leaking gasket. The water lines are plugged via a loop...
Got around to putting in the new shaft seals for the throttle body and it seems I've fractured the lower gasket that seals the water side to the...
Hi Brendo. First Legnum? How about some info on the car, year, auto etc. The forum is fine and can provide everything you need to service and DIY...
Hi Bear. I've only ever had to do the one and based on how it came out in the end, no amount of penetrene or spray would have aided in the...
