1997 coty manual legnum.

hozza

hozza

Leaving Skid Marks
Location
Queensland
First Name
Nathan
Drive
97 COTY manual legnum.(gone)
96 GTO MR
S13 silvia
Hey guys
I have been poking around on here for a while now.
I came across my manual coty legnum for a ridiculously cheap price 2 months ago.
Its running stock boost.
so should pick up some power with a tune.


  • replaced clock with boost and afr gauge.
  • blue lights in aircon vents
  • hid low beam
  • led parks
  • incar voltage gauge(compartment near right knee)
  • changed leds in climate controller
  • camera in front bumper(so i dont run into gutters)
  • painted red calipers
  • 2x12" pioneer slim line subs in custom box leds lighting them when boot is open
  • milion head unit(ebay elcheapo)
  • EPR inter-cooler with 3xe silicon piping.
  • turbo smart kompact bov(plumed)
  • Oil catch can
  • looks like RPW down pipes
  • and 3inch catback


plus lots of little things.

am planning on keeping this car for a while am going to try for 220kw over the next year.
am currently in albury/wodonga
but should be in Brisbane by about July.


cheers
nathan
 
Nice pickup man, got some interesting features such as a manual gearbox (didnt think cotys came in manual) and the carbon dash. On a side note that A/F ratio (if under load) is reading wrong because that is way too lean, car would have blown up by now lol.
 
mills_88 said:
Nice pickup man, got some interesting features such as a manual gearbox (didnt think cotys came in manual) and the carbon dash. On a side note that A/F ratio (if under load) is reading wrong because that is way too lean, car would have blown up by now lol.
Click to expand...
.
coty's dont stock has been converted at some stage.
Really i thought it was running rich.
i thought it was ment to be down at 12:1ish

smitty said:
That's Jared's old car isn't it? Welcome anyway mate!
Click to expand...
Yeah it is. wonder if he is missing it?
 
mills_88 said:
Nice pickup man, got some interesting features such as a manual gearbox (didnt think cotys came in manual)
Click to expand...

They didn't.

Yep, you got a good car for the price it went for. Cool looking engine bay.

As Matt said, 19:1 AFR? Gauge would be way wrong.
 
godzilla said:
12:1 when under load is good if you aren't getting knock. 19:1 is so lean its not funny.
Click to expand...
dang. might have to check that out.
It was installed when i got it and i thought it was always a bit odd.

edit: When i looked at it the sensor wire was hooked up to the wrong wire.
 
You must log in or register to reply here.
Top Bottom