Any one want to lend me a 1.3u cable

[hozza]

Need to flush my AYC, have every thing set up but my cable wont work the ayc ecu.
It could be because it has the combined abs ayc ecu.
If that's the case I might have to do it the old fashion way.

Would be happy to come and get it and drop it off.

Thanks in advance
Hozza

 

[Guest]

Is your steering wheel dead straight? I found that it's more than 30 degrees off centre then Evoscan won't connect to the AYC actuators.

The other thing is that you need to remove a pin from your cable, pin 9 I think it was. Better double check though!

 

[hozza]

ill check the wheels. thanks
Pin 9 is removed, i think there is some thing about pin 1 and 15 have to be connected though?

 

[qball]

sometimes they are a bit tempramental, Steve from TME had trouble getting his to work on my car but eventually got there

 

[hozza]

Thanks guys, gave up and did it with the wheels in the air.
Bout to go for a test drive if its making funny noises ill try to persist with my cable.

Edit: worked well no groaning or any thing its amazing how much a fluid flush improves the handling of the car.

 

[TME_Steve]

I've been finding the car can't be too far out of level.... Last time I did my car it just would not connect, I had to roll it down the drive and come back up to get it to go....

 

[godzilla]

It sure does make a difference.

Bit scary doing it with car off the ground?

 

[hozza]

I havent tried my cable again.
I might give it a go some where random like a carpark.

I took all four wheels off. But the noise and seeing the front hubs whipping around isnt exactly comforting.

 

[lathiat]

Battery level also matters. Doesn't take much for it to cut out.. so try connect a battery booster or something maybe.

 

[naughtika]

Nathan.. you do know i do have a 1.3u cable right? and Im only 5 minutes from you..

 

[Kaldek]

Can someone tell me why pin #9 must be removed from the OBD cable?

 

[naughtika]

I never removed pins from my obd connector

 

[jungle]

I never removed pins from my obd connector

Me either!

 

[Kaldek]

Pin 9 is the ETACS pin (apparently). I don't even think my OpenPort cable HAS a Pin 9.