AYC trouble

kevin

Hesitantly Boosting
Lifetime Member
Location
england
First Name
david
Drive
2001 VR4 legnum
hi all,
it seems that my AYC isn't working any more, i would like to fix it but where to begin...
i think it all started after the last service.
if i start the car all is fine but after a couple of meters the red ayc light comes on.
i checked the fluid and that is OK
any thoughts?
cheers
 

Vstar_83

Leaving Skid Marks
Location
Adelaide
First Name
Matthew
Drive
96 Gen 8 VR4 Galant
hi all,
it seems that my AYC isn't working any more, i would like to fix it but where to begin...
i think it all started after the last service.
if i start the car all is fine but after a couple of meters the red ayc light comes on.
i checked the fluid and that is OK
any thoughts?
cheers
Maybe the pump? Wheel speed sensors? Have you done a diagnostic check?
 

pretzil

2 AYC Bars
Location
Qld
First Name
Rick
Drive
Legnum VR4
Can you hear the pump trying to prime when you first start driving? It's in the back RHS of the car.
 

kevin

Hesitantly Boosting
Lifetime Member
Location
england
First Name
david
Drive
2001 VR4 legnum
i did an diagnostics and there were a couple of faults on the ABS but there is no ABS warning light on while driving.
on the AYC is was a voltage and electrical failure (code 12 and 83) i checked the fuses and they are both fine.
thing is, when i start the car the AYC bars will work on the first couple of corners but after 500m or so the red warning light comes on.
i do not hear the pump but then again i never have... is it a well recognizable sound? when should i hear it? once the engine is running or even when the keys are on ignition?
 
Top Bottom