Billet Adjustable Cam Pulleys

6A13TT TYPE S

3 AYC Bars
Lifetime Member
Location
New Zealand
First Name
Adam
Drive
1999 Legnum VR4 Type S
20220205_142811.jpg
20220205_142838.jpg
20220205_143057.jpg
20220205_150313.jpg
20220205_151715.jpg



After lots of delays and other bullshit ive finally programmed and made the protype inners.

Now I can work out some anodising. Hopefully it wont be too much longer till our 4th axis arrives so I can actually use the 1200$ worth of custom carbide tooling to cut the teeth.

Its getting closer to completion..
 

6A13TT TYPE S

3 AYC Bars
Lifetime Member
Location
New Zealand
First Name
Adam
Drive
1999 Legnum VR4 Type S
20220207_142959.jpg
20220207_143800.jpg
20220207_150706.jpg



Fixture and program for the PCD threads in the belt ring done. The stock cam position trigger fits like a glove.

I just need to optimise the lathe programs to better suit production. As i just did it quick and dirty to rattle off the prototypes.

Hopefully the global supply chain being fucked at the moment doesnt hurt me too much in wait time for the equipment to cut the teeth onto the outer.

Finally becoming relality though
 

6A13TT TYPE S

3 AYC Bars
Lifetime Member
Location
New Zealand
First Name
Adam
Drive
1999 Legnum VR4 Type S
The outers will be black regardless as they need to be hard anodized for wear resistance or the belt will just eat into the aluminum.
You can anodized the centers a natural/clear finish if so desired.
 

twisted32

Leaving Skid Marks
Lifetime Member
Location
Adelaide
First Name
Rob
Drive
2000 Type S Leggy (toy)
NW Pajero (daily)
Looking good Adam.
Was just about to msg you about these as my engine is about to start going together....
 

6A13TT TYPE S

3 AYC Bars
Lifetime Member
Location
New Zealand
First Name
Adam
Drive
1999 Legnum VR4 Type S
Well after the first set is done and on a running engine to test ill be hopefully doing batches of 10 sets
 
Top Bottom