[Brisbane] - Need to borrow a set of wheels for compliance

G

Guest

Unregistered
Hey guys,

My Galant VR4 finally lands on the 8th of August which is like 8 days away.

I need to borrow a set of wheels with DOT approved tyres that has legal tread to fit to the car during the compliance process.

Reason is, I do not want to buy 4 new tyres for the factory wheels as I have a set of 18's coming for it.

Once complied the wheels will be returned back to the owner in the same condition they were lent to me in.

Your help is appreciated.
 
G

Guest

Unregistered
Anything as close to possible to stock size.

15-18 inch is OK
 
G

Guest

Unregistered
I have some stock 16's i think but one of the tyres is busted and i need to check the condition of the rims. They were in an accident and are scratched but not sure if buckled? Does this help?
 
G

Guest

Unregistered
Thanks for the offer mate, I will keep it in mind if all else fails.

Cheers
Altaaf
 

Kristian

Leaving Skid Marks
Location
SA
First Name
Kristian
Drive
Changes daily
There's a better than even chance the workshop will have a set there you can borrow. Ask them first :)
 
G

Guest

Unregistered
There's a better than even chance the workshop will have a set there you can borrow. Ask them first :)

Good idea mate, I just emailed them now to see if its possible.

Oh by the way I'm the guy that called you in regard to importing the Yellow NSX, once I'm over the VR4. I will be in contact with you mate.

Cheers
 
Top Bottom