For Sale QLD Coil On Plug Kit v.3

[naughtika]

Hi everyone, here's a new thread for the COP kit..

Below are couple of pictures of the new set that I use

Front Bank

Rear Bank

Front and rear Bank

How the v3.1 harness is placed / installed

This has been tested with and without tune and works the same as the kit that I made in the past.

Also, this kit sits slightly lower compared to the v.2 kit and should allow you to use your factory engine cover.

Below are the members who's bought the kit from me

Price for the Kit $900 + postage

DUE to AUD vs USD Exchange rate, the new price for the COP kit is at $1150 including postage (to Eastern side of Australia only - for other location, I can get quotes for postage)

Kit consists of the following

- x6 Brand New Denso Ignition Coils (made in japan only)
- Set of PnP harness
- Pair of Plates to suit front and rear banks
- Set of washers as spacer
- x1 Brand New rocker cover bolt washer/seal

If you have any questions, please feel free to pm me or reply to this thread

=====
Update as of 04 Feb 2016

Price: $1050

=====

Update as of 16/04/2016

******PRICE UPDATE******

$850 Delivered - for OzVR4 Paid Members / $950 Delivered - for non-paid members

What's included..

6x Genuine Denso Coils (Japan)
Set of Plates (4mm CNC'd / Front and Back)
Set of Harness Nuts & Bolts for ease of Installation
1x Rocker Cover Bolt Gasket

=====

******PRICE UPDATE 19 March 2017******

$900 Delivered - for OzVR4 Paid Members / $1000 Delivered - for non-paid members

What's included..

- 6x Genuine Denso Coils (Japan)
- Set of Plates (4mm CNC'd / Front and Back) - Powder Coated in Black or Aluminum Color
- Set of Harness Nuts & Bolts for ease of Installation
- 1x Rocker Cover Bolt Gasket
- Set of Threaded Stand-Offs for proper mounting of the ignition coils

*****PRICE UPDATE 13TH JANUARY 2020*****

$1050 Delivered - for OzVR4 Paid Members / $1150 Delivered - for non paid members

What's included..

- 6x Genuine Denso Coils (Japan)
- Set of Plates (4mm CNC'd / Front and Back) - Powder Coated in Black or Aluminum Color
- Set of Harness Nuts & Bolts for ease of Installation
- 1x Rocker Cover Bolt Gasket
- Set of Threaded Stand-Offs for proper mounting of the ignition coils

Price update is due to importation taxes imposed on us, that means I can't get parts from US / Japan without paying GST

 

[vr4cobra]

missed me on your list again

 

[naughtika]

missed me on your list again

updated

 

[Yo_Mang]

I now have godzilla's car, do I kinda sorta count?

Awesome kits. Great fit and super quick to change spark plugs with too

 

[naughtika]

you do count

 

[GMan]

What are the differences between this and the version 2.0 kit, aside from sitting lower?

 

[naughtika]

different coil

does not require trimming, ensuring warranty claims from supplier is accepted (not that I have ever claimed any)

for N/A application these unit makes the engine feel a lot more responsive

 

[Cameron McPherson]

Much involved in installation, Big C?

Also *watches thread*

 

[whats_doing]

Much involved in installation, Big C?

Also *watches thread*

Front bank - remove Y-pipe.
Rear bank - remove plenum.
That's it. Might be worth to have a spare plenum gasket if you haven't replaced it before and its brittle. Also a good time to replace rocker cover seals if yours are leaking.

 

[Cameron McPherson]

Mad. So no soldering new connections? Haha.

Plan to do a few things in one hit - lifters, new VK22s and COP + Fuel rail all in the one hit later in the year when I can afford it...

 

[naughtika]

These COP kits are plug n play to minimize headaches.

May need to loosen up the nut holding the coil when fitting but is straight forward and same process as changing spark plugs

 

[Cameron McPherson]

<3 Plug and play

 

[lateshow]

Are this kind of sets for sale still?

edit: Found the price.....would hate to pay customs for this......

 

[Ricardo]

Would you be able to supply just the following? if so how much?

Set of PnP harness
Pair of Plates to suit front and rear banks

 

[naughtika]

first post updated

 

[Rabit]

1/. Do these new coils fit under the stock engine cover? 2/. Would changing the front 3 coils require a change to the wiring loom 3/. If answer to no. 2 is no, how much would it cost for 3 coils. PM the answers if you like. I would like to retain the engine cover in the new car as its in good condition and the engine bay is very stock looking at the moment.

 

[Rabit]

Just noticed you have me as having purchased 2 cop kits, at no 6 and no 11. I'm not that wealthy, I only got 1 kit. LOL.

 

[trotty]

1/. Do these new coils fit under the stock engine cover? 2/. Would changing the front 3 coils require a change to the wiring loom 3/. If answer to no. 2 is no, how much would it cost for 3 coils. PM the answers if you like. I would like to retain the engine cover in the new car as its in good condition and the engine bay is very stock looking at the moment.

Unfortunately the engine cover doesn't work with the cop kit. And no u cant just run 3 coils. U need all 6 in this setup as these coils only fire 1 cylinder each. Original coils split fire and go to 2 cyl each. Fires 1 on front back and 1
On rear bank simultaneously.

 

[naughtika]

@Rabit , I dont recommend using the v2 with v3 COP kit as both these hardwares have different output and use different dwell/timings..

to answer your question if it'll fit, yes it will as these sits lower than v1 and v2

what is wrong with your kit?

@trotty , he's got a kit already and wants to utilize on his 2nd car.

 

[AKKO]

Also, this kit sits slightly lower compared to the v.2 kit and should allow you to use your factory engine cover.

Thats cool.

Did you let Mitsubishi know in advance that their stock of spare engine covers is about to sell out.