Repco have a set of 3(?) universal boots that I am yet to find an application they don't work with, just trim to size.
If you search universal CV boot you will find similar stuff.
Genuine were too expensive IMO for a piece of rubber. the inner drivers side joint is made from silicon... but meh, I replaced mine with a rubber one - 2 years still looks good.
@BCX - my passenger / LH inner boot is torn in two. Who did the boots for you, and from where? need mine fixed to get the car back together....fast forward to today, the boots are still intact and not too bad shape. CVs haven't been touched since my original post in 2013.
Mot of us are using this@BCX - my passenger / LH inner boot is torn in two. Who did the boots for you, and from where? need mine fixed to get the car back together....
Thanks mate,Mot of us are using this
0415-N94T - FEBEST BOOT INNER CV JOINT KIT 75X96X22.5
Genuine OEM Cross Reference: 49584-1W200, 49595-3X1A0, 49595-3X1A5, 49595-A64A5, 49506-2EG50, 49605-2EA50, 49505-2HA31, 49595-A64A0, 49542-29320, 49542-T8710, G564-22-540, 49506-26A00, 49582-1W100, 49583-1W100, 49592-3X1A5, 49506-2HA31, MR336596, MR290408, MR336600, G560-22-540, MN147083, MN171540febest.com.au
and
https://www.repco.com.au/parts-service/driveline/cv-boots/repco-cv-joint-boot-kit-100-051/p/A8344329
Unfortunately, I cant remember which is passenger and driver but FEBEST has dimensions and any repco should have above and let you check it for sizing.
Not sure what Repco you go too but I worked at a fair few part time for 5 years and I could count on one hand the staff that would do that.Thanks mate,
i have the shaft out the car now so I might just take it in to repco and get them to measure it and provide me one
Cheers