Engine don't start

[YannickVR4]

Hey guys my Vr4 don't want to start. I have no spark and the fuelpump don't run. If I bridged the relay on the firewall, fuelpump is working. I have ground and 12v on the coils cam/crank angle sensors. I hope someone can help or have idea.
Sorry for my English.

 

[mezje]

I would recommend getting an oscilliscope on the triggers at the crank and cam angle sensor(s) and coils.

Also try bridging the pins on the IFS (ignition failure sensor). Potentially this is the cause of both problems.

 

[YannickVR4]

Ok, danke, ich werde es mit dem Osziloskop versuchen. Das IfS ist nicht installiert. Ich habe ein Löschkit.
Is the cam or crank angle sensor not working, they cutting fuel and ignition system?