G
Guest
Unregistered
well due to recent issues with my gearbox/clutch,
the gearbox wass taken out today...
initial thoughts was that the clutch release bearing had failed,
this was not the case...
when the fluid was droped from the gear box, metal came out!
BIG BITS!!!
turns out the input shaft bearing had failed...
and the input shaft oil seal was also worse for where.
luckily theres no damge to the box or gears,
anyway, part number on a couple of parts if anyone need to change
these are the numbers on the parts which appear to be standard items.....
input shaft bearing - NTN 6306V23
input shaft oil seal - NOK BH5066E
heres some photos of the days work, and damage
BIG UPS TO MIKE FOR DOING 99% OF THE WORK! (mpau009 on www.clubvr4.com)
COULDNT HAVE DONE WITHOUT YOU!!
the gearbox wass taken out today...
initial thoughts was that the clutch release bearing had failed,
this was not the case...
when the fluid was droped from the gear box, metal came out!
BIG BITS!!!
turns out the input shaft bearing had failed...
and the input shaft oil seal was also worse for where.
luckily theres no damge to the box or gears,
anyway, part number on a couple of parts if anyone need to change
these are the numbers on the parts which appear to be standard items.....
input shaft bearing - NTN 6306V23
input shaft oil seal - NOK BH5066E
heres some photos of the days work, and damage
BIG UPS TO MIKE FOR DOING 99% OF THE WORK! (mpau009 on www.clubvr4.com)
COULDNT HAVE DONE WITHOUT YOU!!