Hey Guys

PulsarGuy

PulsarGuy

Idling at the Lights
Location
SA
First Name
Antony
Drive
Jap Spec 88' HH VR4
Hi, Im Antony and i live in the Adelaide Hills,
i just purchased a Jap Spec 88' Galant VR4 =D
mods are, EVO 3 Turbo on 11psi and a few other EVO 3 bits, big Exhaust system from turbo back, Momo Steering wheel, Koni Shocks with whiteline springs i think, 16" 5 spokers and a Jun BL twin exhaust
 

Attachments

  • l_fa4f1c6517fa6e304b6e4a991a9f2aae.jpg
    l_fa4f1c6517fa6e304b6e4a991a9f2aae.jpg
    50.3 KB · Views: 39
Hey Antony, welcome to the club.
What's with the name "Pulsarguy" lol you drive a Galant :D
Always been a big fan of the HH Galants. I was going to buy an RS Evo Zero at the begining of the year. Wicked cars.

Show us more photos man. I see you hang out with the MCA guys too :)
 
Good to see another VR4 owner in the Adelaide hills.
 
Thanks for the comments, its an import but i bought locally, im the 3rd owner in Aust im pretty sure, and have met both the old owners.
lol yer i used to drive a 84 n12 Pulsar, and got a bit of a reputation for it so i stuck with my old 'Pulsarguy' name haha
Yer the photo is the old owners lol, we went on an MCA cruise a year ago, but haven't been on one since ;) i think they are yet to discover forced induction =p
 
dimi_108 said:
HAHAHAHA what happened? Was yours the only performance car there? :ROFLMAO:
Click to expand...

yer pretty much lol, some clown crashed a mirage aswell, then a Mazda 3 MPS joined the cruise on lobe' road so that sped things up a bit, but yer all in all very sllllllow cruise haha
 
Antony, bring it out on the next SA Cruise in Feb next year - will be good to mix some old school with newer VR4s ;)

The exhaust manifold looks like some sorta tuned-length steampipe manifold too, NICE! :)
 
Hotwire said:
Antony, bring it out on the next SA Cruise in Feb next year - will be good to mix some old school with newer VR4s ;)
Click to expand...

Hey will do Mate, whats the date for this cruise?
 
dimi_108 said:
Hey Antony, what kind of power is your VR-4 making at the moment?
Click to expand...

im not sure, need to get it dyno'd somewhere, which SA tuners have awd dynos?
im gonna guess around 130-140 atws and probs 180 flywheel?
its currently running 11psi
 
Antony take it to Steve Knight Racing (SKR)
4 Walla St Lonsdale
0419 827 850

He has a brand new Mainline 1000hp AWD dyno, and is an evo specialist. Will probably be able to give you some good hints about what to do next with the car too ;)
 
Hotwire said:
Antony take it to Steve Knight Racing (SKR)
4 Walla St Lonsdale
0419 827 850

He has a brand new Mainline 1000hp AWD dyno, and is an evo specialist. Will probably be able to give you some good hints about what to do next with the car too ;)
Click to expand...

ah brilliant cheers mate, wat kind of power do the legnums make atw standard?
 
Between 140 and 160kw as far as I have seen dyno results.

Maybe lower than that sometimes. 200kw@ the flywheel is the factory claim stock.
 
Well, pre-facelifts are about 130 awkw stock, facelifts around 145 mark(?)
with just boost increase to 12psi, and leaning out using SAFC II or similar should net around the 155-160 mark depending on the car I believe.

3" Exhaust (including front pipes), FMIC & 14psi boost net around 185-200 awkw.
 
hmm ok, damn i need to get mine dyno'd wanna know!
 
You must log in or register to reply here.
Top Bottom