HKS - EIDS

gorgath

Leaving Skid Marks
Location
NSW
First Name
Irwin
Drive
1997 Legnum RED!!!
Hey Guys,

I always wanted to get one of these. Reason is, everytime I drive hard, my idle drops quickly and wants to stall everytime I stop or brake hard.

To those had it or have experience with this product, do you think it will be helpful to solve my issue?

http://www.hksusa.com/products/?id=2175
 
I was looking at one too Gorgs. Never went through with it though..

Have you tried playing with the idle tension screw ? It could be set too low or something?

I had that same problem after my tension screw had to be replaced. Took a little hit & miss before I found the right spot for it.
 
Dawso - I did removed and placed the OEM BOV and it is still happening.

Brad - no, I have not touch my idle control. I am kinda scared of fiddling it to be honest. LOL

I have been searching the on how to adjust the idle control but could not find anything. Maybe I am looking at the wrong area.
 
It's not that scary Irwin. If I can do it, anyone else on here sure can!

Here's some pics from when I lost my screw ;

Image000.jpg


Image001-1.jpg


Both my Legnums didn't have the screw caps, I'd ordered it in & now the Super has it. So you may need to remove the screw cap first, the just use a flat blade screwdriver & while the engine is idling, slowly turn (I forget which way now) & you'll hear the idle revs either increase or decrease...... adjust to somewhere else as a test & go for a drive to evaluate.
That's the way I did it on Grandpa. He lost the screw completely when driving. Took the one of the Super & installed it. First time I went to drive as I took my foot off the accelerator, it stalled on me.
Finally got it working though...
 
Gorgs, if you get stuck, feel free to come around my place and I'll look at it for you.
 
Gorgs, if you get stuck, feel free to come around my place and I'll look at it for you.
I will take you in with that offer if everything fails on Brad's easy fix instruction. :)
 
Top Bottom