Just serviced the car..

naughtika

OzVR4 Stalker
Location
Brisbane, QLD
First Name
Christian
Drive
'96 Galant VR4, '17 MB A180, '25 Macan GTS
hey fellas, had the car serviced yesterday, did it myself..

parts that i've replaced were

spark plug seals
- Spark plugs - BKR7EIX gapped at .8mm
- Changed oil - Fuchs 0w40 Full Synth
- Filter - Z142A
- Tidied up some vacuum hoses and insulated some wires so that they don't get brittle..

I definitely don't get any more shudder when trying to accelerate from 2500rpm+ and acceleration feels alot more smoother..

Problems I've found..

- My brake light lamp switch started to sh!t itself.. it still does work, but occasionally either the light would stay on or not work at all.. so it's kind of not safe..
- Rubber Seal for the PCV valve.. had gotten brittle that when I took it off from the old Rocker Cover it fell apart..

now my question..

- will the lancer, outlander or older galant model's switch fit ours too?!

Also I've always replaced my rocker cover with the one I've bought from Gly..

here's a quick pic..
 

Attachments

  • DSC00999.jpg
    DSC00999.jpg
    98.5 KB · Views: 60
G

Guest

Unregistered
A lot of Mitsubishi's use the same pcv valve so you should be fine with one from another model. My one fell apart as well when I replaced the seals and gaskets. Ahh you meant the brake switch
How did you get on with the seals?
 

naughtika

OzVR4 Stalker
Location
Brisbane, QLD
First Name
Christian
Drive
'96 Galant VR4, '17 MB A180, '25 Macan GTS
just found out the part number for the brake lamp switch.. MR228924

which is also the same as the Mitsubishi CT9A or Evo 8

can the mod please add this to the part number's list..
 
Top Bottom