Mitsubishi Coil plug wiring

[Blue legnum]

Hi All
I was given a set of Mitsubishi 380 coils from a friend.. I couldn't help but think if they could be used in a legnum if the same? Does anyone know if the coil plug wiring @ the connector which plugs into the coil is the same on different Mitsubishi cars? Eg. Mitsubishi 380 coil plug wiring? Are the wires which feed the coil the same as the legnum?
Cheers

 

[jet150]

All i know is on our cars the coil plug goes

Earth
+Trigger
+12

 

[naughtika]

Rob, its

looking at the female connector (harness side)

from left to right its

Trigger / Ground / +12v

 

[Blue legnum]

Thanks Christian & Rob
There was talk its the same as the evo's? Maybe other mitsubishi models but I think more evo?
The 380 coil is a bosch & not sure of it's pin/wire arangement?
He's doing a 380 conversion in his TL magna & gave me the coils & put a distributor in it so it runs off the factory ecu already in the car!

 

[naughtika]

Joe, sorry I'm a bit confused..

your friend gave you the 380 coils as well as the distributor?!?

 

[VOLK]

Nah, Joe only got the coils. The TL use a distributor with igniter inside, like the 4G15s Chrisman.

 

[Blue legnum]

Yeah that's right he's using a distributor to run it in the TL.
It avoids having to change the ecu & loom over I believe!
I've got the coils only.

 

[naughtika]

oh ok.. that clears it then.. thought you were gonna use distributor on your car..

give those 380 coils a shot.. and see how it goes