G
Guest
Unregistered
well . has any 1 else given any thought to either removing the symbol or altering it and way shape or form. ??
well i was bored and did give it thought...
and after finishing work at 6 starting to take the front of my car apart
and never having done it b4 ... and not looking to do it the easy way ... i had both lights and the middle piece out in not much time .
then used a pick to flick the silver diamonds out of the symbol and take to it with a drill .... after drilling many small holes and then dragging the drill from hole to hole to cut the shape out i used a small file and made the edges all smooth so the symbol still looked correct
used 6 multi coloured LEDs .... was going to use ones that flash between red and blue but thought a cop would be an ass to me for it so i didn't.
so after wiring the LEDs and heat shrinking them so it couldn't short out. then tested it and they all lit up at the same time and changed colour... 1 LED had a slight lag. so i cut it out and put a new one into "a lot easier than it sounds" then it all worked well so i put the LEDs in the back on the mitsubishi symbol and used 5-minute Araldite so set them in place . then put front of car back togethor and wired it into my park lights
now when i turn my lights on my Mitsubishi symbol at the front glows different colours ...
no pic yet but i was amused doing it
well i was bored and did give it thought...
and after finishing work at 6 starting to take the front of my car apart
and never having done it b4 ... and not looking to do it the easy way ... i had both lights and the middle piece out in not much time .
then used a pick to flick the silver diamonds out of the symbol and take to it with a drill .... after drilling many small holes and then dragging the drill from hole to hole to cut the shape out i used a small file and made the edges all smooth so the symbol still looked correct
used 6 multi coloured LEDs .... was going to use ones that flash between red and blue but thought a cop would be an ass to me for it so i didn't.
so after wiring the LEDs and heat shrinking them so it couldn't short out. then tested it and they all lit up at the same time and changed colour... 1 LED had a slight lag. so i cut it out and put a new one into "a lot easier than it sounds" then it all worked well so i put the LEDs in the back on the mitsubishi symbol and used 5-minute Araldite so set them in place . then put front of car back togethor and wired it into my park lights
now when i turn my lights on my Mitsubishi symbol at the front glows different colours ...
no pic yet but i was amused doing it