Need Help from our vr4 family ....

VR4legnum98

Leaving Skid Marks
Lifetime Member
Location
NSW
First Name
Horacio
Drive
VR4 legnum
Hi there Guys ..... been doing some mods to my Legnum and I though about doing the lifters, painted the rocker covers and some suspension work as well (lowered king springs) and stereo up-grade. But I have come up to a dead end , marked and labeled everything except a small pipe on the Plenum and a vacuum hose that I have no idea where it goes .
here are some pictures so that you can see what I'm talking about . Once again thank you in advance for all your help . ...




If someone would be kind enough to post some pics of where these two go , will be much appreciated
 

naughtika

OzVR4 Stalker
Location
Brisbane, QLD
First Name
Christian
Drive
'96 Galant VR4, '17 MB A180, '25 Macan GTS
where you are pointing your finger at.. there are 2 solenoids.. one is for the boost control.. one with the grey connector and the other is for the Fuel Pressure Regulator, that's where the hose should've connected to.. try tracing it from there.. then connected to where you have it circled in the first image
 

VR4legnum98

Leaving Skid Marks
Lifetime Member
Location
NSW
First Name
Horacio
Drive
VR4 legnum
thanks so much Christian , very helpful , it was as you said and almost done with the engine bay .
you advise is much appreciated .
 
Top Bottom