Parts Seen on eBay, TradeMe, Yahoo JP, EvoOz etc

G

Guest

Unregistered
Front Cut located in Bright, Victoria.

$1500 instant, $1000 reserve. Transfer diff used, 170,000km on engine and cranks over.

http://cgi.ebay.com.au/MITSUBISHI-G...ryZ43807QQssPageNameZWDVWQQrdZ1QQcmdZViewItem


this was the half cut i almost bought.
it's the guy who has the 6a13tt powered magna..

he couldnt 100% tell me what he has used, and i couldnt understand why he would need the transfer case for a FWD car...\

the strut brace is also very bent as they lifted the front cut with it..
 

Outlanded

Leaving Skid Marks
Location
Queensland
First Name
Brent
Drive
97 Legnum VR-4
way over priced.... IMO

doesnt metntion how many km's there done etc, clearly there on a 6.5 now and its been in a stack!
 

Hipsi

Leaving Skid Marks
Location
QLD
First Name
Trav
Drive
D40 Navara
pfft, bugger paying that much for a fancy italian name.
 

Madhav

Leaving Skid Marks
Location
WA
First Name
Madhav
Drive
96 S2 RZ Supra with 500whp
(FS) 1x Sparco racing seat

The item is actually on ebay, however I'm just bringing to the attention of everyone here just in case.

8525_1.jpg


It's got the rails to bolt straight into the drivers side, is in good condition except for small wear and tear around right arm rail. Here's the link to ebay
 

qball

1 AYC Bar
Location
nsw
First Name
David
Drive
1999 White Legnum Type S Cold Spec with Recaros+Sunroof
There's a set of carbon dash/stereo surround on ebay satarting at $100
 

VR-04-TT

1 AYC Bar
Location
NSW
First Name
Paul
Drive
2005 Liberty 3.0R Spec B
You've gotta look overseas for cheaper brembos, shipping isn't that bad for them. My set cost me $AUD827 to my door, I was pretty lucky but you can get them for under 1k without the rotors (just get new ones anyway).

http://cgi.ebay.com/ebaymotors/Mits...004QQitemZ140237746176QQrdZ1QQsspagenameZWDVW

Not sure if these will fit:
http://cgi.ebay.com/ebaymotors/4-Br...001QQitemZ110256430873QQrdZ1QQsspagenameZWDVW

I've asked about the bolt spacing on these...they look small..so if it's 130...could be a PFL option!!!
http://cgi.ebay.com/ebaymotors/merc...024QQitemZ370057930570QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.com/ebaymotors/BREM...002QQitemZ120268813134QQrdZ1QQsspagenameZWDVW

http://cgi.ebay.com/ebaymotors/BREM...001QQitemZ110258846974QQrdZ1QQsspagenameZWDVW

RADIAL mounting! It would be an absolute piece of p*** to get a bracket made up to fit these to a PFL VR4.
http://cgi.ebay.com/ebaymotors/Brem...90777QQrdZ1QQsspagenameZWDVW#ebayphotohosting

Again, radial mounting. Not sure about the rotor size tho
http://cgi.ebay.com/ebaymotors/BREM...022QQitemZ350067424163QQrdZ1QQsspagenameZWDVW
 

SiliconAngel

1 AYC Bar
Location
Perth, WA
First Name
SA, Trevor
Drive
'99 Legnum VR4 Black MT
Lifters/ lash adjusters
http://cgi.ebay.com/ebaymotors/MITS...62QQcategoryZ33614QQihZ013QQitemZ230255540834

Any thought about these or if they would even fit our cars?
Pitty about the price though.
24 lifters at AUD$20 each is gonna set you back around $480 anyway, so that price is about right. The product however is not and won't fit our cars.

I'm ordering a single lifter from Mitsi Japan so I can take it to some parts shops around here to try to find an aftermarket alternative and report back with my findings.
 

Hotwire

1 AYC Bar
Premium Member
Location
South Australia
First Name
Lee
Drive
97 COTY
[Spotted] - Intercooler Kit on EBAY

I know there is a spotted thread, but thought this deserved its own thread.

Selling from Hong Kong, a 600x200x70 IC with 60mm (2.35") in/out, replacement aluminium lower pipes and silicone joiners.

Power seller with 98.7% positive feedback, so I presume other kits have been good from this seller.

Seems like it may be a good option?!

Click Here
 

frozen

1 AYC Bar
Lifetime Member
Location
Queensland
First Name
Josh
Drive
1990 Mitsubishi GTO
Formerly: 1996 Galant VR-4
doesnt include the rest of the piping. seems a bit of a normal price comparing to the other kits coming available - id wait for the ones made by the people on this forum. (notice its just the 2 pipes from the intercooler sides, not the whole piping set like will be available from members soon. Also - hong kong vs australia hmmmmmm :)

still a good find, let me know if you do try it out :p
 

naughtika

OzVR4 Stalker
Location
Brisbane, QLD
First Name
Christian
Drive
'96 Galant VR4, '17 MB A180, '25 Macan GTS
be the first to try.. :D

it seems like a good kit.. intercooler that fits without mods.. and also got mounts tabs.. replacement coils on the PS Oil Cooler..

but what i dont get is, why replace steel pipes that are already there.. why not just replace it with quality silicons if you were just to install an aftermarket cooler.. at least its got the pipe extension for the BOV..
 
Top Bottom