For Sale NZ Solid shifter base and cable bushings

[6A13TT TYPE S]

Items and prices:
Aluminium shifter base bushing kit (8pcs)
Aluminum shifter cable end bushing kit (4pcs)
Both base and cable bushing set 85NZD plus shipping
Only available as a full set from now on.

Description:
The stock rubber bushes on the shifter base and cable ends are very soft and often worn out, replace them with some solid alloy bushes to lock the shifter base down to the cars floor pan and remove as much slop as possibe from the cables for a more positive and direct shift feel.

Delivery options:
Shipping worldwide. POA depending on location

Payment methods:
NZ bank deposit, Cash, Paypal

Contact details:
Private message or post in this thread

Location:
Christchurch New Zealand

There are 2 variations.some cars have a large cable and and a small cable end, some have 2 small cable ends. (Large/small pictured)
I've been told facelift is big/small and pfl is small/small but i have not confirmed this, so you will be best to check the gearbox end of your cables for sizes before ordering. Especially so if your car is a manual conversion car.
I do have both sizes in stock.

 

[jungle]

Wondered if you might offer these, was going to hit you up regardless. I'll be down for a complete set, pm me bank details or Paypal

 

[pete_gpx]

How difficult are these to fit?

 

[6A13TT TYPE S]

How difficult are these to fit?

about 10 minutes for the under bonnet cable ends and 15-20 mins for the shifter base bushes including interior dissassembly and re-assembly.

 

[trotty]

Damn u. I've spent this weeks allowance. Lol

 

[6A13TT TYPE S]

Made 7 sets of bushings so far. 3 sets are already sold and one set Im keeping for myself, so 3 left for immediate sale before I make the next batch.

 

[Badger]

Oh Im keen

 

[MatiLP640]

Those "aluminium shifter cable bushings (2pcs)" are for inside side or outside side or both? And not sure but we have 2 cables for 4 ends and 4 bushes right? And also if you have evo shortshifer you dont need base ones couse they were in the kit right?

 

[6A13TT TYPE S]

Those "aluminium shifter cable bushings (2pcs)" are for inside side or outside side or both? And not sure but we have 2 cables for 4 ends and 4 bushes right? And also if you have evo shortshifer you dont need base ones couse they were in the kit right?

the shifter cable bushings are just 2 pieces for the transmission end of the cables as pictured above, and the shifter end of the cables dont have bushings and are not replaceable (see attached photos) some people have the shifter base bushings that come with the short shift kits but I have heard from multiple people that they dont fit properly. Hence why I made my own version. I have installed a set of these on one car already and the owner said its sharpened the shifts up alot and that its well worth while to do. Ill take his car for a drive on friday and see how it feels.

 

[MatiLP640]

Fair enough, Ill be keen for cable ones next month thanks

 

[Kaldek]

Got any of the shifter cable bushings in stock?

 

[6A13TT TYPE S]

Yep sure do. One set of cable bushings and one set of shifter base busings.
I also made billet crossgate busings too as the stock ones are plastic ill thow one in for free if you buy both cable and base bushings

 

[Kaldek]

Yep sure do. One set of cable bushings and one set of shifter base busings.
I also made billet crossgate busings too as the stock ones are plastic ill thow one in for free if you buy both cable and base bushings

Alright then. I'll PM you for PayPal info etc.

 

[low+vr4]

Keen on a set when available

 

[6A13TT TYPE S]

I have one more set in stock you can have now if your intrested

 

[MatiLP640]

Oh siht! I totally forgot about it! Still keen on cable ones, do you have them in stock as well?

 

[6A13TT TYPE S]

Last set I had in stock just sold. But ill be making more stock later this week provided I have enough alloy around the shop.

 

[MatiLP640]

Any news? Did you manage to make some?

 

[6A13TT TYPE S]

Nope didn't have any alloy bar in stock but if you want some I can make them a priority

 

[MatiLP640]

Im interested but its not huge deal, I can wait till youll have some alloy and spare time, no worries