Turn Light Removal and Bulbs

[illuzian]

Hey Guys,

Just spent about 20mins searching OzVR4 and CVR4 but can't seem the answer to this.

Might front turn lights appear to be missing bulbs(the ones next ot the foggies), for starters is there any guide on how to get at them, they look pretty burried under.

Also what kind of bulbs do they take, is this something generic I can source or will I need to sell an arm and a leg to get them from Mitsi?

 

[naughtika]

pretty easy.. jack your car up.. you'll see where the bulbs go.. I think you turn it anti-clockwise and you'll see if the bulbs there or if its busted.. then replace it..

 

[snickells]

The outter "fog" lights are disconnected at compliance in Austraila, because we arnt alowed to have more than 6 forward facing lights.

So, if you want them to work, you'll need to see if you can reconnect the wires.

 

[illuzian]

Thanks guys, I'll have a look but I'm pretty sure there are no bulbs in there but again is it a generic light or is it some specialised part?

 

[SiliconAngel]

There's a thread detailing almost every globe type in the VR4, search is your friend

 

[illuzian]

Generally search fails me on both cvr4 and ozvr4(using google as well) but ironicly searching for the single word "bulb" as netted me a result for once:
http://ozvr4.com/forums/showthread.php?t=762&highlight=bulb

 

[SiliconAngel]

Search 'bulbs' or 'globes' in title only But yea, that's the correct thread

 

[VR4 WRC]

I too got curious ages ago so when car was jacked up i stuck my head underneath to have a squiz. I noticed that one of the wire's had been cut (as mentioned for compliance). I just got the crimpers and a joiner plug out and reconnected the wires. I got all the spare bulbs when it was complianced so just match up the correct style. Sorry i cant help anymore than that.

Scott