Since we have so many discussions about this i thought id throw up this guide, feel free to ad bits and ill edit this post to ad in your suggestions.
Also, if you find this guide any good, rep me!!! <3
DISCLAIMER: if you are concerned about staying within legal limits of your states laws, then this is not your thread. please click the little [X] up the top right of your page
________________________________________________________________________________________________________
Got an iPhone??
heres a good offset calcualtor app, its $1.19
http://itunes.apple.com/us/app/get-flush/id413214938?mt=8&ign-mpt=uo=4
_________________________________________________________________________________________________________
Dont know what offset is? CLICK ME
->worried bout brembo fitment? its not really offset but more spoke design. check with your chosen wheel manufacturer about low disk and high disk fitments etc
-> Re: facelift flairs/fitment: these fitment are specified for non flaired vr4's even though flaired pictures may hav been used. please refer to the diagram below regarding flairs and how much "extra" clearance they give you. note: i put "extra" in quotes as flairs dont actually give u extra space (especially if you wish to lower your vr4)
as you can see, flairs actually decrease the amount of space availble in inside the guard, but it is fixable, the inner lips of the guard must be removed and the guard rolled
________________________________________________________________________________________________
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
OK:
Basic wheel fitment (read: aussie / LEGAL (lol) / tempe spec fitment)
Diameters: 16, 17, 18, 19 inches
Widths: 7, 7.5, 8
Offsets: +45 +44 +43 42 +41 +40
Notes: These offsets and widths will fit easy but u will be rep'in the sunken wheel look. 8" +45 may mince inside suspension arms. shouldnt be any need for rear guard work camber mod done or not
Known combination's to work: everything
Side Note: For those of you concerned about legality but still want to fill your guards with a 8 inch rim, you will be needing something like a 8inch width and a +10 to +20 offset. This is rather uncommon and expensive, so you ca either fork out the cash, buy sunken rims or rock out hard style by reading on further
Flush/Aggressive Wheel Fitment
Diameters: 17 18 19
Widths: 8 8.5 9
Offsets: +40 +39 +38 +37 +36 +35 +34 +33 +32
Notes: evo wheels fall into this catagory. if u lower your car, yes u may/will hav to roll your rear guards, although stock hieght should be fine
most pics below are of lowered cars. take this into consideration. more low= more camber = wider wheels
Known combinations to work:
evo 7 rims: 17x8 +38
evo 8 rims: same
evo 9 rims: same http://img152.imageshack.us/img152/4348/ozvr4headeruv3.jpg
evo X(10) rims: 18x8.5 +38 http://thegspot.orconhosting.net.nz/Legnum-VR4/Evo X/fitted/x8.JPG
17x8.5+38 http://i3.photobucket.com/albums/y58/leebutts/VR4/wheels/IMG_6695.jpg
before lowering:
http://i3.photobucket.com/albums/y58/leebutts/VR4/wheels/IMG_6689.jpg
http://i3.photobucket.com/albums/y58/leebutts/VR4/wheels/IMG_6692.jpg
after lowering:
http://i3.photobucket.com/albums/y58/leebutts/OZVR4/lowered/IMG_7454_R.jpg
http://i3.photobucket.com/albums/y58/leebutts/OZVR4/lowered/IMG_7455_R.jpg
17x8+35 http://i162.photobucket.com/albums/t251/Hotwire33/Legnum/DriftR2.jpg (owner: hotwire)
18x9 +35 http://api.photoshop.com/home_8028e...be-px-assets/75aef56a637240a58e7d75c63d5d9004
18x8.5 +35 http://img822.imageshack.us/img822/9634/dsc0136820medium.jpg
18x9 +38 (with a 235, @ lowered height (will poke at stock height)" ) (owner: ygoslo)
http://i8.photobucket.com/albums/a2/ygoslo/100_1727-1.jpg
http://i162.photobucket.com/albums/t251/Hotwire33/All Japan Day/Joel2.jpg
http://i162.photobucket.com/albums/t251/Hotwire33/All Japan Day/Joel1.jpg
18x8+30 with a 225/40 at standard height
this will pull in nicely when lowered
http://i176.photobucket.com/albums/w181/tom_lindley/04_08_2010_006.jpg
http://i176.photobucket.com/albums/w181/tom_lindley/04_08_2010_007.jpg
18x8.5+30 on a FL galant
http://www.ozvr4.com/threads/wheel-offsets-the-will-this-wheel-fit-thread.6044/page-100#post-320513
___________________________________________________________________________________________________________________
HellaFlush
for those more daring. i dont think u need this guide if u wanna roll on these baby's but ill add in the combos
18x9 +22, real ghetto VIP look, real guards need to be rolled and possibly pumped (owner: Athid?)
http://ozvr4.com/forums/attachment.php?attachmentid=2955&d=1241276985
http://ozvr4.com/forums/attachment.php?attachmentid=2956&d=1241277566
17x9.5 +35 fits, again, custom work needed, front need wider guards and rears need the be rolled and flared (owner: Bradc)
http://www.clubvr4.com/forum/uploade...1204159657.jpg
http://www.clubvr4.com/forum/uploade...1179949548.jpg
http://www.clubvr4.com/forum/uploade...1179949366.jpg
http://www.clubvr4.com/forum/uploade...1179949486.jpg
http://www.clubvr4.com/forum/uploade...1179949622.jpg
18x8.5+20 works too, needs lowering to induce camber, no photos yet
18x10+22 (on the rear)
http://farm5.static.flickr.com/4049/4380858591_1cb59469d5_b.jpg
http://farm5.static.flickr.com/4018/4381611458_8cc2af6a5c_b.jpg
http://farm5.static.flickr.com/4031/4380568685_f09fe5aba3_b.jpg
18x10+32 (on the rear)
http://i729.photobucket.com/albums/ww292/badasse30/stuff/galant/002-1.jpg
http://i729.photobucket.com/albums/ww292/badasse30/stuff/galant/007.jpg
http://i729.photobucket.com/albums/ww292/badasse30/stuff/galant/009.jpg
http://i729.photobucket.com/albums/ww292/badasse30/stuff/galant/007.jpg
18x9+30 (R34 GTR rims) (owner: SteveP)
http://i701.photobucket.com/albums/ww13/LTerbeekephotos/All Jap Day 2010/IMG_33111600x1200.jpg
http://farm3.static.flickr.com/2701/4394016053_97b3657b6b.jpg
18x9.5 +30 all round (225 tyre) (FL legnum) (owner: HankScorpio)
http://i105.photobucket.com/albums/m203/TTC2008/Legnum/Image0042.jpg
http://i105.photobucket.com/albums/m203/TTC2008/Legnum/Image0043.jpg
http://i105.photobucket.com/albums/m203/TTC2008/Legnum/Image0044.jpg
http://i937.photobucket.com/albums/ad217/RM_Photography/Social Events/WCC Photography 2/IMG_6476.jpg
18x9.5+30 with a 225/40 (PFL legnum) (front and rear guards rolled/pulled)
http://ozvr4.com/forums/attachment.php?attachmentid=9839&d=1303123930
http://ozvr4.com/forums/attachment.php?attachmentid=9840&d=1303123980
http://ozvr4.com/forums/attachment.php?attachmentid=9841&d=1303123994
http://ozvr4.com/forums/attachment.php?attachmentid=9843&d=1303124033
more here
with camber fix done:
http://ozvr4.com/forums/showthread....it-quot-thread&p=233765&viewfull=1#post233765
17x9+30 (225/45 tyre, rolled/pumped rear guards) (owner: unclepaulie)
with camber fix:
http://i804.photobucket.com/albums/yy325/paulie88/Galant/DSCF0357.jpg
http://i804.photobucket.com/albums/yy325/paulie88/Galant/DSCF0354.jpg
without:
http://i804.photobucket.com/albums/yy325/paulie88/Galant/DSC01273.jpg
http://i804.photobucket.com/albums/yy325/paulie88/Galant/DSC01274.jpg
18x9.5+35 (on a pfl with a 225/40) (owner: slinz)
(front tyre poke) http://i176.photobucket.com/albums/w181/tom_lindley/IMAG0050.jpg
http://i176.photobucket.com/albums/w181/tom_lindley/IMAG0049.jpg
18x9+35 on a PFL with 225/40 semi slicks
http://ozvr4.com/forums/showthread....ty-quot-thread&p=240619&viewfull=1#post240619
17x9+25
http://ozvr4.com/forums/showthread....it-quot-thread&p=237184&viewfull=1#post237184
17x9 +32ish (it's either 32 or 33) on 235/45R17. Car is fairly low, with some rear camber fix. Lip sits proud of non pumped guard by about 5mm.
Owner: tails
https://farm8.staticflickr.com/7058/13911038066_03ef2fcbdf_b.jpg
http://farm8.staticflickr.com/7336/12529625983_f4d0885994_c.jpg
ok, im done for the moment, ill ad more as i find more.
if u wanna ad a suggestion post it and ill copy it in
post the size and a link to a photo
ps thanks to respective owners for use of their vehicles, all copyrights to original posters etc
Other ozvr4 threads:
What wheels for your VR4
Brembo/Vr4 Friendly Wheels
Also, if you find this guide any good, rep me!!! <3
DISCLAIMER: if you are concerned about staying within legal limits of your states laws, then this is not your thread. please click the little [X] up the top right of your page
________________________________________________________________________________________________________
Got an iPhone??
heres a good offset calcualtor app, its $1.19
http://itunes.apple.com/us/app/get-flush/id413214938?mt=8&ign-mpt=uo=4
_________________________________________________________________________________________________________
Dont know what offset is? CLICK ME
->worried bout brembo fitment? its not really offset but more spoke design. check with your chosen wheel manufacturer about low disk and high disk fitments etc
-> Re: facelift flairs/fitment: these fitment are specified for non flaired vr4's even though flaired pictures may hav been used. please refer to the diagram below regarding flairs and how much "extra" clearance they give you. note: i put "extra" in quotes as flairs dont actually give u extra space (especially if you wish to lower your vr4)
as you can see, flairs actually decrease the amount of space availble in inside the guard, but it is fixable, the inner lips of the guard must be removed and the guard rolled
________________________________________________________________________________________________
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
OK:
Basic wheel fitment (read: aussie / LEGAL (lol) / tempe spec fitment)
Diameters: 16, 17, 18, 19 inches
Widths: 7, 7.5, 8
Offsets: +45 +44 +43 42 +41 +40
Notes: These offsets and widths will fit easy but u will be rep'in the sunken wheel look. 8" +45 may mince inside suspension arms. shouldnt be any need for rear guard work camber mod done or not
Known combination's to work: everything
Side Note: For those of you concerned about legality but still want to fill your guards with a 8 inch rim, you will be needing something like a 8inch width and a +10 to +20 offset. This is rather uncommon and expensive, so you ca either fork out the cash, buy sunken rims or rock out hard style by reading on further
Flush/Aggressive Wheel Fitment
Diameters: 17 18 19
Widths: 8 8.5 9
Offsets: +40 +39 +38 +37 +36 +35 +34 +33 +32
Notes: evo wheels fall into this catagory. if u lower your car, yes u may/will hav to roll your rear guards, although stock hieght should be fine
most pics below are of lowered cars. take this into consideration. more low= more camber = wider wheels
Known combinations to work:
evo 7 rims: 17x8 +38
evo 8 rims: same
evo 9 rims: same http://img152.imageshack.us/img152/4348/ozvr4headeruv3.jpg
evo X(10) rims: 18x8.5 +38 http://thegspot.orconhosting.net.nz/Legnum-VR4/Evo X/fitted/x8.JPG
17x8.5+38 http://i3.photobucket.com/albums/y58/leebutts/VR4/wheels/IMG_6695.jpg
before lowering:
http://i3.photobucket.com/albums/y58/leebutts/VR4/wheels/IMG_6689.jpg
http://i3.photobucket.com/albums/y58/leebutts/VR4/wheels/IMG_6692.jpg
after lowering:
http://i3.photobucket.com/albums/y58/leebutts/OZVR4/lowered/IMG_7454_R.jpg
http://i3.photobucket.com/albums/y58/leebutts/OZVR4/lowered/IMG_7455_R.jpg
17x8+35 http://i162.photobucket.com/albums/t251/Hotwire33/Legnum/DriftR2.jpg (owner: hotwire)
18x9 +35 http://api.photoshop.com/home_8028e...be-px-assets/75aef56a637240a58e7d75c63d5d9004
18x8.5 +35 http://img822.imageshack.us/img822/9634/dsc0136820medium.jpg
18x9 +38 (with a 235, @ lowered height (will poke at stock height)" ) (owner: ygoslo)
http://i8.photobucket.com/albums/a2/ygoslo/100_1727-1.jpg
http://i162.photobucket.com/albums/t251/Hotwire33/All Japan Day/Joel2.jpg
http://i162.photobucket.com/albums/t251/Hotwire33/All Japan Day/Joel1.jpg
18x8+30 with a 225/40 at standard height
this will pull in nicely when lowered
http://i176.photobucket.com/albums/w181/tom_lindley/04_08_2010_006.jpg
http://i176.photobucket.com/albums/w181/tom_lindley/04_08_2010_007.jpg
18x8.5+30 on a FL galant
http://www.ozvr4.com/threads/wheel-offsets-the-will-this-wheel-fit-thread.6044/page-100#post-320513
___________________________________________________________________________________________________________________
HellaFlush
for those more daring. i dont think u need this guide if u wanna roll on these baby's but ill add in the combos
18x9 +22, real ghetto VIP look, real guards need to be rolled and possibly pumped (owner: Athid?)
http://ozvr4.com/forums/attachment.php?attachmentid=2955&d=1241276985
http://ozvr4.com/forums/attachment.php?attachmentid=2956&d=1241277566
17x9.5 +35 fits, again, custom work needed, front need wider guards and rears need the be rolled and flared (owner: Bradc)
http://www.clubvr4.com/forum/uploade...1204159657.jpg
http://www.clubvr4.com/forum/uploade...1179949548.jpg
http://www.clubvr4.com/forum/uploade...1179949366.jpg
http://www.clubvr4.com/forum/uploade...1179949486.jpg
http://www.clubvr4.com/forum/uploade...1179949622.jpg
18x8.5+20 works too, needs lowering to induce camber, no photos yet
18x10+22 (on the rear)
http://farm5.static.flickr.com/4049/4380858591_1cb59469d5_b.jpg
http://farm5.static.flickr.com/4018/4381611458_8cc2af6a5c_b.jpg
http://farm5.static.flickr.com/4031/4380568685_f09fe5aba3_b.jpg
18x10+32 (on the rear)
http://i729.photobucket.com/albums/ww292/badasse30/stuff/galant/002-1.jpg
http://i729.photobucket.com/albums/ww292/badasse30/stuff/galant/007.jpg
http://i729.photobucket.com/albums/ww292/badasse30/stuff/galant/009.jpg
http://i729.photobucket.com/albums/ww292/badasse30/stuff/galant/007.jpg
18x9+30 (R34 GTR rims) (owner: SteveP)
http://i701.photobucket.com/albums/ww13/LTerbeekephotos/All Jap Day 2010/IMG_33111600x1200.jpg
http://farm3.static.flickr.com/2701/4394016053_97b3657b6b.jpg
18x9.5 +30 all round (225 tyre) (FL legnum) (owner: HankScorpio)
http://i105.photobucket.com/albums/m203/TTC2008/Legnum/Image0042.jpg
http://i105.photobucket.com/albums/m203/TTC2008/Legnum/Image0043.jpg
http://i105.photobucket.com/albums/m203/TTC2008/Legnum/Image0044.jpg
http://i937.photobucket.com/albums/ad217/RM_Photography/Social Events/WCC Photography 2/IMG_6476.jpg
18x9.5+30 with a 225/40 (PFL legnum) (front and rear guards rolled/pulled)
http://ozvr4.com/forums/attachment.php?attachmentid=9839&d=1303123930
http://ozvr4.com/forums/attachment.php?attachmentid=9840&d=1303123980
http://ozvr4.com/forums/attachment.php?attachmentid=9841&d=1303123994
http://ozvr4.com/forums/attachment.php?attachmentid=9843&d=1303124033
more here
with camber fix done:
http://ozvr4.com/forums/showthread....it-quot-thread&p=233765&viewfull=1#post233765
17x9+30 (225/45 tyre, rolled/pumped rear guards) (owner: unclepaulie)
with camber fix:
http://i804.photobucket.com/albums/yy325/paulie88/Galant/DSCF0357.jpg
http://i804.photobucket.com/albums/yy325/paulie88/Galant/DSCF0354.jpg
without:
http://i804.photobucket.com/albums/yy325/paulie88/Galant/DSC01273.jpg
http://i804.photobucket.com/albums/yy325/paulie88/Galant/DSC01274.jpg
18x9.5+35 (on a pfl with a 225/40) (owner: slinz)
(front tyre poke) http://i176.photobucket.com/albums/w181/tom_lindley/IMAG0050.jpg
http://i176.photobucket.com/albums/w181/tom_lindley/IMAG0049.jpg
18x9+35 on a PFL with 225/40 semi slicks
http://ozvr4.com/forums/showthread....ty-quot-thread&p=240619&viewfull=1#post240619
17x9+25
http://ozvr4.com/forums/showthread....it-quot-thread&p=237184&viewfull=1#post237184
17x9 +32ish (it's either 32 or 33) on 235/45R17. Car is fairly low, with some rear camber fix. Lip sits proud of non pumped guard by about 5mm.
Owner: tails
https://farm8.staticflickr.com/7058/13911038066_03ef2fcbdf_b.jpg
http://farm8.staticflickr.com/7336/12529625983_f4d0885994_c.jpg
ok, im done for the moment, ill ad more as i find more.
if u wanna ad a suggestion post it and ill copy it in
post the size and a link to a photo
ps thanks to respective owners for use of their vehicles, all copyrights to original posters etc
Other ozvr4 threads:
What wheels for your VR4
Brembo/Vr4 Friendly Wheels