Smurph Leaving Skid Marks Lifetime Member Location QLD First Name Symond Drive 1997 VR4 Galant PFL Aug 27, 2015 #1 Hey guys, I'm going to change my front hubs to FL to install my brembo's and I need 2 new ABS sensors. Thanks
Hey guys, I'm going to change my front hubs to FL to install my brembo's and I need 2 new ABS sensors. Thanks
pretzil 2 AYC Bars Location Qld First Name Rick Drive Legnum VR4 Aug 27, 2015 #2 What's wrong with the ones in the FL hubs already? They don't like being removed...
Smurph Leaving Skid Marks Lifetime Member Location QLD First Name Symond Drive 1997 VR4 Galant PFL Aug 27, 2015 Thread starter #3 The loom has been cut in the removal process
Gt_Galant EC5A Location New South Wales First Name Fred Drive Galant Aug 27, 2015 #4 When you take off your pfl hubs cant you just cut your loom and attach it to the fl hubs if the actual sensors are fine then the wiring should work once you solder the wires, im pretty sure.
When you take off your pfl hubs cant you just cut your loom and attach it to the fl hubs if the actual sensors are fine then the wiring should work once you solder the wires, im pretty sure.
Smurph Leaving Skid Marks Lifetime Member Location QLD First Name Symond Drive 1997 VR4 Galant PFL Aug 27, 2015 Thread starter #5 Yes, that should work but I would feel more comfortable with new sensors considering they are my brakes
Yes, that should work but I would feel more comfortable with new sensors considering they are my brakes
Gt_Galant EC5A Location New South Wales First Name Fred Drive Galant Aug 27, 2015 #6 Yeah know what you mean but honestly if soldered right and taped and secured properly then should be more than fine if you dont find a set.
Yeah know what you mean but honestly if soldered right and taped and secured properly then should be more than fine if you dont find a set.
pretzil 2 AYC Bars Location Qld First Name Rick Drive Legnum VR4 Aug 27, 2015 #7 From what I've heard, you are much more likely to have braking problems if you try swapping out sensors than if you re-solder some wires.
From what I've heard, you are much more likely to have braking problems if you try swapping out sensors than if you re-solder some wires.