A small DIY project!

G

Guest

Unregistered
01012009706yz3.jpg


i just did mine
 

SiliconAngel

1 AYC Bar
Location
Perth, WA
First Name
SA, Trevor
Drive
'99 Legnum VR4 Black MT
OMG you painted the PADS?! That's gonna make them bloody hard to get off when you need to change them... :banghead: Not to mention it will peel the paint off the callipers when you try, too :(
 

Taraska

Leaving Skid Marks
Location
Queensland
First Name
Taraska
Drive
Black VR-4!!!!!!
This is funy! How many members will do this? It doesnt matter about the pads. They will come off. Callipers can be resprayd again.
 

ygoslo

1 AYC Bar
Location
Victoria
First Name
Tim
Drive
91 Silvia, 97 Galant
I hope you gave Ronald McDonald his brakes back after you did the Brembo conversion.
 

3M-TA3

Leaving Skid Marks
Location
QLD
First Name
Daniel
Drive
BLACK MANUAL '97 LEGNUM
i did this ages ago, but i also took the caliper off and the pads out. wire brushed the caliper. also with the caliper off you can remove the disc, tape it up and i painted the hat matt black aswell, tidys every thing up good and proper. looks good behind my white wheels on black leggy. just remember if you are doing the rear, set the car up stable and flat cause you need to release the hand brake to get the rear discs off!!

happy painting
 

Zild

Leaving Skid Marks
Location
NSW
First Name
Andy
Drive
1998 VR4 Galant
If this was truly DIY there would be nothing covering the rotors.
I call shens!
 
Top Bottom