Bride Seat Rails

[cittris]

Can anyone explain what the different seat rails mean? i cannot find an explaination.

I need to buy some for my car.

Thanks!

 

[unclepaulie]

Tris, jump onto nengun, they hav little explanations.

There is essentially 3 bolt patterns across the bride seat range, then there is also the height of the rail itself

 

[CANDEE]

The std aftermarket rails are 35mm lower than std, then the lowmax rails are about 15mm lower than that...

I have an aap seat on normal aftermarket rails in the car atm, and its loooowww.... To the point it was in Wynn's manual Leggie and was swapped with my factory reacaro as you cant operate the clutch properly.... And my missus cant see over the dash with it in either...

 

[cittris]

Ok so!
i have this
http://www.bride-jp.com/r-pdf/mitsubishi_100713.pdf

This looks to be exactly what i want
http://www.nengun.com/bride/rails-fo-type

however FO is not available for CT9A

Is love something with side mounts and a slider.

Im thinking i may have to get RO typ[e rails and seperate side mounts

 

[sn00ze]

while were on the subject does anyone know whether genuine bride rails will fit a pair of these imitation babies
http://www.ebay.com.au/itm/2x-BRIDE...=AU_Car_Parts_Accessories&hash=item2310958df9

 

[unclepaulie]

Ok so!
i have this
http://www.bride-jp.com/r-pdf/mitsubishi_100713.pdf

This looks to be exactly what i want
http://www.nengun.com/bride/rails-fo-type

however FO is not available for CT9A

Is love something with side mounts and a slider.

Im thinking i may have to get RO typ[e rails and seperate side mounts

Email streeter, show him that. He'll sort you out. ( my reply was wiped)

while were on the subject does anyone know whether genuine bride rails will fit a pair of these imitation babies
http://www.ebay.com.au/itm/2x-BRIDE...=AU_Car_Parts_Accessories&hash=item2310958df9

Fakers. Real jobbies are like that much each

 

[sn00ze]

Lol yeh paulie hence me calling them imitation babies. When u say email streeter and he'll sort me out, do you mean he may be able to tell me if genuine rails will fit or supply me with correct rails?

 

[sn00ze]

Edit* or will he just call me a spanner for not saving and buying genuine?

 

[unclepaulie]

oh sorry, the top bit was directed at tris, but i was on the iphone then...way to hard to navigate properly (editted that post)

but yeah, jesse could help you out too with geniune seats/rails. jimmy_ec5w (or something similar) has bride reps, they look pretty flash, not sure what rails he used

 

[cittris]

Paulie i did email jesse earlier today

his reply:

Bride make the rails to suit their seats into each car, Im sure they
have a similar rail which would do the same job (RO or something like
that)

EDIT:
HMMMMM
Checked upgarage - quite a few on there and they are priced nicely.
http://www.upgarage.com/upgarage/stock/1/2/1004014008792/020
http://www.upgarage.com/upgarage/stock/1/2/0708135003223/135
http://www.upgarage.com/upgarage/stock/1/2/0912019005559/019
http://www.upgarage.com/upgarage/stock/1/2/1010162002810/162

Then i could get some side mount brackets from velo and WIN!

 

[unclepaulie]

Lol doesn't seem to helpful haha but I'd tell Jesse to order the right ones lol. Not like an Evo isn't a popular model. Sure your bride won't work with the factory recaro rail?


Also, show jesse what seat you want and what height.

 

[cittris]

Lol doesn't seem to helpful haha but I'd tell Jesse to order the right ones lol. Not like an Evo isn't a popular model. Sure your bride won't work with the factory recaro rail?


Also, show jesse what seat you want and what height.

HAHA Jesse is always helpful. I didn't expect much since he is just giving out free advice

Tomorrow i am going to try the seat i want (Velo GPT-2) and will measure the side mounting points and compare to bride.
Other than that they should fit and at the end of the day they can be modified to fit. I am just trying to avoid also people i spoken to rkn it will work.

I dunno its just a bit cumbersome and i have never looked into rails until now

Thanks for all your help paulie!

 

[unclepaulie]

haha too easy mate, if the velo is a side mount, you could get some 8mm plate folded into L shape brackets to suit the seat.

like so

 

[cittris]

Yeah the velo is side mount and they offer brackets.

I found the seat i want!
http://www.velo.com.au/seatimagespodiumii/

Sat in it today and OMG!

Also got some measurements, and it is a fucking shame the Bride FO rail is not available for CT9A because that would be perfect out of the box.