bumper repair shops

Buckas

Leaving Skid Marks
Location
WA
First Name
Dan
Drive
97 manual legnum
Can anyone recommend a good bumper repair place? From what i've heard from panel beaters today its probs gonna need to be heat treated to get it back to shape.

ive been quoted 8-900 from a panel and paint place but in his words:
"we do high end cars here. bmw's, mercedes', porches, ferraris. if you just wanted a cheap job i'd go to (some place ive forgotten) where they just do everyday normal cars" :wanker:

the next place i went to was really honest and just told me they send all their stuff off to somewhere else, place called everlast in welshpool.

so if anyone has had a buckled/slightly torn bumper repaired and could recommend a place please let me know. i'm not looking to spend too much cause if i hunted around im pretty sure i could get one from nz eventually and mine could be bolted back on and not look overly bad for now.
cheers
 

jet150

Anyone thirsty?
Premium Member
Location
victoria
First Name
Rob
Drive
VR4
What do you need to do to your bumper? If its cracked, ripped or torn there are places that do plastic welding.
 

Zild

Leaving Skid Marks
Location
NSW
First Name
Andy
Drive
1998 VR4 Galant
Best not to get plastic bumpers repaired at a panel beaters.

Go see someone like The touch up guys that specialise in plastic bumper repair.
They do a great job.
www.touchupguys.com.au
 

Buckas

Leaving Skid Marks
Location
WA
First Name
Dan
Drive
97 manual legnum
What do you need to do to your bumper? If its cracked, ripped or torn there are places that do plastic welding.

http://ozvr4.com/forums/showthread.php?t=5175&page=5

second post down is what needs repairing.

yeh i saw the site for the touch up guys and was going to give them a call tomorrow. was just interested to see if anyone has had first hand experience with pplaces in wa and could recommend someone
 

trounced

Leaving Skid Marks
Location
NSW
First Name
Wes
Drive
1997 Mitsubishi Legnum VR4
lol sorry Matt but i dont think i would let you anywhere near my car if fire is the fix :-P

i took my cracked one to a local panel beater they said $500 for plastic welded and fixed and full respray i said fine do it and droped it off, 3 weeks latter they handed it back saying sorry couldnt fix it.

Now instead of just a cracked bumper i have a cracked warped and melted join that is going to need a whole lot more work to fix it :-(

just dont get it done at a small country place they just stuff you around :-(

i hate living in the country
 
G

Guest

Unregistered
Apparently this guy is VERY good with repairing plastic bumpers:

Graeme Wilkins
Perth Plactic Co
Unit 1 / 111 Clayton St
Bellevue 6065
92506069
0411722488
 
G

Guest

Unregistered
No luck sourcing a new one Dan?

Double check with Trevor as well, he needed to get some repair done, may be able to help you out.
 

Buckas

Leaving Skid Marks
Location
WA
First Name
Dan
Drive
97 manual legnum
well nothing really in wa of course. i found an auction on trade me for 2 rear doors, boot hatch including rear wing and rear bumper all in trigger mauve but i think shipping would be a huge hassle. so wanted to see what it'd cost to get repaired first. the bumper was also the only spot that had a bit of damage on it before. i think matt (syther) probably reversed the car into something while he was preparing it for me :p (he does a brilliant polish job btw).

cheers ant ill give them a call and find some quotes. bumper is off and in the back of the grandparent's patrol so ill just drive it round everywhere and find whatevers cheapest
 

MUNGEL

Leaving Skid Marks
Location
WA
First Name
Jess
Drive
99 Series II Legnum
Try the Bumper Shop in Welshpool. Thats where Trev was getting his front bumper done. To fix my front bumper, they were going to charge $600 including painting.
I thought that was pretty reasonable as most of you have seen how shocking my front bar is looking at the moment.

Bumper Shop
U6/ 96 President St
Welshpool WA 6106
(08) 9361 5088
 

Buckas

Leaving Skid Marks
Location
WA
First Name
Dan
Drive
97 manual legnum
ive been given a rough estimate from the touch up guys, mobile service. considering ive already got the bumper off myself and i can refit it myself im looking at high 300's for heat treatment, plastic weld and respray, varying depending on how much needs to be sprayed
 

Buckas

Leaving Skid Marks
Location
WA
First Name
Dan
Drive
97 manual legnum
Well after being given the rough estimate i've now been told that because the bumper is creased in lots of places he probably won't be able to get a good result and has recommended i get a replacement.

i'll still take it round to some other places to get a second and third opinion but otherwise i'll have to look at options from nz.

looking at this which may get me some more spares i can either sell or store, depends how much to ship
http://www.trademe.co.nz/Browse/Listing.aspx?id=234827674
 

ALSHWNOGO

Leaving Skid Marks
Location
West Aust
First Name
Kellie
Drive
Vauxhall VXR Monaro Turbo
I damaged mine in the same place... One place I went to told me it couldn't be fixed at all so now I'm emo and cbf getting it fixed so now mine is looking rather sad and bunky
 

SiliconAngel

1 AYC Bar
Location
Perth, WA
First Name
SA, Trevor
Drive
'99 Legnum VR4 Black MT
Dan & Kel, speak to Edward at The Bumper Shop as Jess mentioned above, he specialises in repairing plastic bumpers and the only thing he can't fix is one that is missing pieces. I guarantee he can fix your bumper Dan.

There's also a place in the ACT called Everlast, which is useful for the east coast guys but not so much for us. They have stock of exchange bumpers for most models of cars, but they won't have one for ours.
 

Buckas

Leaving Skid Marks
Location
WA
First Name
Dan
Drive
97 manual legnum
thanks, trevor. i gave the bumper shop a call to see if i could send pics off just so he could tell me if the repair would be possible or not before i drove out there (busy uni time) but he insisted i must bring it in. so ill take it out there after wednesday when all my assessments have finished.

kel the other option is send an email to VR4WGN. hes quoted me roughly 500aus for one delivered from nz which i thought was pretty reasonable. only reason i havent already jumped on that is cause hes searching for one in trigger for me.
i got quoted 300 for labour only through a mates friend to get a respray so i didnt want to get one in any old colour and get it sprayed, that option is starting to add up a bit
 

ALSHWNOGO

Leaving Skid Marks
Location
West Aust
First Name
Kellie
Drive
Vauxhall VXR Monaro Turbo
thanks, trevor. i gave the bumper shop a call to see if i could send pics off just so he could tell me if the repair would be possible or not before i drove out there (busy uni time) but he insisted i must bring it in. so ill take it out there after wednesday when all my assessments have finished.

kel the other option is send an email to VR4WGN. hes quoted me roughly 500aus for one delivered from nz which i thought was pretty reasonable. only reason i havent already jumped on that is cause hes searching for one in trigger for me.
i got quoted 300 for labour only through a mates friend to get a respray so i didnt want to get one in any old colour and get it sprayed, that option is starting to add up a bit


What colour?

Mines sitting in backyard at the moment. Took it out to Antilag Cruise 21 but hasn't left lately... Getting eager to fix it asap
 

Buckas

Leaving Skid Marks
Location
WA
First Name
Dan
Drive
97 manual legnum
the bumper shop said he could fix mine butw as gonna come to 600-650 once painted and didnt include the other blemishes.

VR4WGN didnt have my colour so im going a full resprayed mint condition one from him for 700 but you could always ask him and see if he has one in the right colour, may be able to save on shipping if your quick and it gets sent with mine :p
 

ALSHWNOGO

Leaving Skid Marks
Location
West Aust
First Name
Kellie
Drive
Vauxhall VXR Monaro Turbo
the bumper shop said he could fix mine butw as gonna come to 600-650 once painted and didnt include the other blemishes.

VR4WGN didnt have my colour so im going a full resprayed mint condition one from him for 700 but you could always ask him and see if he has one in the right colour, may be able to save on shipping if your quick and it gets sent with mine :p

How much is the bumpers from him?
 

Buckas

Leaving Skid Marks
Location
WA
First Name
Dan
Drive
97 manual legnum
500 delivered but you may have to wait for one in the right colour and paint may not be perfect. im paying 700 for a resprayed one
 
Top Bottom