DIY video's (coilover install and allignment) - good info for first timers.

OVR444

Leaving Skid Marks
Location
QLD
First Name
Brett
Drive
2004 Mirage

Kenneth

1 AYC Bar
Location
New Zealand
First Name
Kenneth
Drive
1999 Galant VR-4
I don't rate the install videos as the install is specific to the car and doesn't contain an useful information which wouldn't be apparent by just looking at it.

For example, it pays to lift both sides of the car at once (so, both fronts off the ground when doing the front, both rear) for the specific reason that it means you do not end up fighting with the ARBs.

It also pays to crack open the lower arm bolts at the sub frame and the top A arm. This is because they are rubber bushings where the rubber deforms during suspension movement. If you do not crack these open, you fight the bushings AND potentially the rubber will tear due to the amount of deformation when you lower it a fair way.


That said, the alignment videos were very useful. It would be nice if some information was given on how to affect the alignment. Then again, if you need to be told that, you probably shouldn't be doing your own alignment.

I would request a the OP or a Moderator move the alignment videos to their own thread somewhere for easy searching.

+ Rep for the alignment vids.
 
Top Bottom