evo rear diff

[Gt_Galant]

Are you guys talking about the rear diff mounts (Left & Right) ?
Left : MR316129
Right : MR316130

Is that what your talking about ? Got a picture of part your after ?

 

[6A13TT TYPE S]

the 2 rear most diff bushes are able to be pressed out and replaces but its a absolute bastard even with the subframe out of the car. trust me I did it to two subframes to try get a single bush out to measure up to make solid alloy replacements.

 

[TME_Steve]

While we're talking about diffs, I need an sayc housing, specifically the side with the bleed nipples, if anyone has one with a dead centre, I'll be happy to take it off your hands....

 

[Macca]

Are you guys talking about the rear diff mounts (Left & Right) ?
Left : MR316129
Right : MR316130

Is that what your talking about ? Got a picture of part your after ?

No, not those ones, the other ones.

the 2 rear most diff bushes are able to be pressed out and replaces but its a absolute bastard even with the subframe out of the car. trust me I did it to two subframes to try get a single bush out to measure up to make solid alloy replacements.

These ones. So I'm guessing you didn't find any rubber bushes then?

 

[6A13TT TYPE S]

These ones. So I'm guessing you didn't find any rubber bushes then?

Never intended to use rubber replacements. removed the stock ones solely to measure up.

 

[Macca]

Maybe there is something generic, I don't suppose you have those measurements still?

 

[6A13TT TYPE S]

Maybe there is something generic, I don't suppose you have those measurements still?

55mm OD
14mm ID
36mm Thick

the dimensions are identical to the front "diff wing" bushes also.

 

[Macca]

Excellent, so all four are the same, that makes things a little easier.

 

[Macca]

I don't suppose anyone has actually bought new diff rubbers?

EDIT: Hey Adam, I haven't really seen the diff bushes up close so I cant really tell. Would these work:

http://www.whiteline.com.au/product_detail4.php?part_number=W91380

It says they are 54.8mm but it also says OD of 55mm so that should work, I think the middle metal part is 33.3mm wide with a total width of 42.4mm so a little wider than you said so a bolt upgrade is probably needed and the tube they supply brings the centre hole down to 14.3mm which is about right.

 

[6A13TT TYPE S]

I don't suppose anyone has actually bought new diff rubbers?

EDIT: Hey Adam, I haven't really seen the diff bushes up close so I cant really tell. Would these work:

http://www.whiteline.com.au/product_detail4.php?part_number=W91380

It says they are 54.8mm but it also says OD of 55mm so that should work, I think the middle metal part is 33.3mm wide with a total width of 42.4mm so a little wider than you said so a bolt upgrade is probably needed and the tube they supply brings the centre hole down to 14.3mm which is about right.

I'd say that would do the job. $114 is a bit of a gamble to buy all four but you could easily buy one, then get a hold of a front "diff wing", test fit it into that. and if all works well buy another 3 to finish it off.

 

[brat81]

Sorry to necro but i'm in need of rear diff bushes, what was the outcome was there a replacement bush ?

 

[trotty]

I still don't think
It's been done.

 

[Macca]

Hey mate, I thought I had put this information somewhere but I guess not. I ended up ordering 4 of these MB864708 for $120 delivered.

They fit perfectly and replace all 4 rear diff rubbers. I think they are off a Pajero from memory but don't quote me on it.

 

[brat81]

So to be 100% sure these are for the rear diff and replace the bushes that go into the subframe.

Is it possible to get them locally, like from a dealership ?

 

[Macca]

Two of them press into the subframe and secure the back of the rear diff, the othe two press into the rear diff side brackets and secure the sides of the rear diff to the sub frame.

 

[brat81]

Ok the next thing is my Legnum has a Magna VRX viscous diff.

So i would assume i would only need 2 of these bushes not 4 ??

 

[trotty]

Mines got the magna diff aswell the bushes are
All the same.

 

[Macca]

What Trotty said. I'd replace all four so you know all four are new but thats just me

 

[brat81]

Sweet thanks guys