How to remove CV joint

[vr4ssz]

Hey guys

I have no idea how to remove the CV from the gearbox, driver side front.

Any help would be appreciated, thanks.

 

[AKKO]

I've found that LCA failures do a pretty good job of it :-(

What stage are you at is it still in the hub etc?

 

[vr4ssz]

I removed it from the hub just trying to remove it from the gearbox.

 

[AKKO]

If i recall, Large flat head screwdriver or pry bar between the collared portion that mates up with the box and the green cup section, leverage against the box itself. Be careful but firm... It will come away. I think this is also covered in a manual conversion thread or similar somewhere will see if I can find a link.

 

[Guest]

These are awesome for popping out driveshafts.

 

[AKKO]

Cant find it, the guide I'm thinking of must be on CVR4

 

[Guest]

 

[vr4ssz]

Thanks for help guys, turned out I was able to replace the inner boot without removing it.

 

[ayreds]

H

Thanks for help guys, turned out I was able to replace the inner boot without removing it.

How the fuck did you replace the boot without removing the drive shaft? Ive already pulled mine out but am trying to figure out how it goes over the knuckle