PCP valve seal - part number

Dr_Josh001

Leaving Skid Marks
Location
Driver, NT
First Name
Josh
Drive
96 Galant VR-4 Auto
Hey guys,

Been a while since posting. Just wondering if someone could please look up the part number for the PCP valve seal on the rocker cover (see photo attached).

Clipboard03.jpg


Cheers
Josh

PS BTW I did an extensive search and could not find any threads relating to this.
 

M0R81U5

Leaving Skid Marks
Location
NSW
First Name
Mick
Drive
PFL Legnum
I picked one up from Repco for about $10. I'll see if I can find the part no...BRB
 
G

Guest

Unregistered
And here are the details plus aftermarket alternatives:

MD183547 VALVE,PCV
1057A033 GASKET,PCV VALVE

Aftermarket from Repco etc:

Valve: PCV-038
Grommet/Gasket: PCG-03

Be careful if you are replacing the grommet, they can be brittle and break into pieces which fall back inside the rocker cover.
 

Dr_Josh001

Leaving Skid Marks
Location
Driver, NT
First Name
Josh
Drive
96 Galant VR-4 Auto
Thanks guys. :)

I'm getting the covers chemical cleaned, but the guys doing it are drilling out the tacks holding the baffle in so they can clean in behind. Then I'll pop rivet the baffles back in.
 

M0R81U5

Leaving Skid Marks
Location
NSW
First Name
Mick
Drive
PFL Legnum
Is it being immersed or sprayed Josh? When I got mine done, I didn't remove the baffles, but it's still spotless behind there
 
Top Bottom