Wanted NSW WTB UTCOMP-3 Unit. Not the Pro version

[Blackbird]

Hi Everyone,
I wanted to put feelers out there to see if anyone has a UTCOMP-3 they'd be willing to part with.
NSW but willing to post. Happy to paypal +3% or cash on pickup if you're local.

Not after the Pro version, just the standard one.

Mine has lost some functionality due to a burnt chip and yes I could solder a new one in there, but thought I'd ask for a whole unit as it would be easier.
Ideally one that hasn't been fitted.
I've talked to Artur from Reveltronics and he doesn't make them anymore. Only the pro version.

Cheers
Steve

 

[NSNO_RJB]

A bit late reply, but Artur did modify a UTcomp Pro to suit at UTcomp-3 screen. was a few years ago so not sure if he still would

 

[Blackbird]

Thank you for the reply.
I did contact Artur for a fix, it seems he wasn't really interested in offering other solutions except for me to find someone who can fix it.
I replaced one of the offending chips by adding jumpers to a few pins where the board was damaged and got it working again.
If that fails again in future I'll probably try installing the Pro version. Problem why I didn't want to go to the Pro version I've modified my clock quite a bit and would possibly need to source another clock (At least the lens) to go to the Pro.