6a12tt & 6a13tt wiring looms .. Please HELP!!!

[Guest]

I need to know if the wiring looms for the 6a12tt and the 6a13tt are the same.

crisis: i have a 6a12tt with no wiring loom.

no wreckers have a 6a12tt wiring loom only a 6A13 tt WIRING loom!!!

so my question is, can i use the wiring loom from the 6A13tt?

thanks peoples!!

 

[Guest]

ok ive been told by a wrecker in qld that the 6a13tt loom will work on the 6a12tt.... iam a bit sus with this,

i need someone on this forum to confirm its ok!! lol
i really trust stuff from this forum compared to people trying to make a buck.

 

[RaZZa137]

that would be very hard to find out i think, im not sure if anyone has a wiring diagram to check even, but personally i think they might be similar, both being v6 n 6a variants.. then again i don't really know what im talking about, lol

 

[Guest]

anyone got wiring diagrams to compare both looms?

... i really need a straight answer coz wreckers stumble around the block a few times.

 

[Guest]

id be very carefull about this,

pre and post facelift wiring ARE different,
also non-turbo and turbo looms ARE different

so i assume the 6a12 will be aswell....

PM kenneth on clubvr4.com

im sure he has a spare loom???

 

[RaZZa137]

hmmm....listen to gly, he's da man! lol, n besides most wreckers i know are dodgy, my friend has a onevia (half 180, half silvia) it blew up it's ca18det or something n after that he was dealing with a few wreckers to try n get an sr20, or any replacement really, he went through 6 or 7 engines literally, but i think he finally found a decent wrecker that helped him out n is all sorted now

but point of story is listen to gly, lol

 

[Guest]

id be very carefull about this,

pre and post facelift wiring ARE different,
also non-turbo and turbo looms ARE different

so i assume the 6a12 will be aswell....

PM kenneth on clubvr4.com

im sure he has a spare loom???

cheers for this gly,

i would have though the 6a13tt and the 6a12tt would fit.. since there both turbo n all.

but, ive emailed kenneth well see how we go.

 

[SiliconAngel]

my friend has a onevia (half 180, half silvia)

I think you'll find they're known as "sil80's" Razz

Good luck Anthony!

EDIT: Stand corrected. Why in the world would anyone want a 180 front on a silvia anyway???

 

[frozen]

sorry to correct your correction but a onevia is a 180 front on a silvia, as opposed to a sil80 which is the silvia front on a 180

 

[Guest]

lol just a tad off topic here?.... pobz ns nissansilvia.com can help with that lol.

 

[VR-04-TT]

I can't imagine the looms being anywhere near the same. For starters they face the opposite way to each other, so the looms will differ just from that. Sounds like that wrecker was just trying to sell you something he's been unable to sell for ages.

 

[mookers]

EDIT: Stand corrected. Why in the world would anyone want a 180 front on a silvia anyway???

The USDM S13 240sx coupe came standard as a "onevia" with the 2.4l stanza/bluebird engine I think... no turbo - great chassis, crap engine was the general opinion. It was also sold with the 180sx hatch body.

(sorry to continue the off-topic discussion...)

 

[SiliconAngel]

Yea, but they're Americans - they're SUPPOSED to have shit taste in cars...

Any joy on the loom from Carsten, Anthony?

 

[Guest]

no word yet

iam soo sad i dont have a loom to run my engine!!

 

[RaZZa137]

I think you'll find they're known as "sil80's" Razz

Good luck Anthony!

EDIT: Stand corrected. Why in the world would anyone want a 180 front on a silvia anyway???

i know sil80's, this particular car is a 1via tho

 

[mookers]

Yea, but they're Americans - they're SUPPOSED to have shit taste in cars...

I drive a VR-4 though... that's me, never doing what I'm supposed to do... lol

 

[RaZZa137]

American's have shit taste in cars but why did the 1via get built?? personally i think both the 180 and silvia look better as separate cars


nevermind, japan always make those weird little cars like "life" n "dunk"

 

[VR-04-TT]

no word yet

iam soo sad i dont have a loom to run my engine!!

There are guys around who will make a loom for you. Or they can splice a loom into your stock one.

I got a guy to splice a DOHC 24v 6G72 loom from a Diamante into my TR Magna which had a SOHC 12v 6G72 loom, he spliced it all together, made it look completely stock.

It can definitely be done...some jobs harder than others. I'd suggest ringing up performance workshops and seeing who they recommend to do it if they don't do it themselves.

Shamlessly lifted from Skylines Australia: http://www.skylinesaustralia.com/forums/Local-Wreckers-Workshops-t13305.html

Performance Workshops
(Listed in alphabetical order)

Name: Central Motor Wreckers
Number: 5332 1721

Name: Chasers Motorworks
Location: 4/440 Dynon Rd, West Melbourne
Number: 9687 7118

Name: CREATD Motorsports
Location: 11a Merola Way, Campbellfield
Number: 9357 7663

Name: Dr. Drift
Contact: Sam
Number: 0425 818 755
Location: Unit 4/9 Alick Rd, Brooklyn 3012

Name: EAS Performance
Contact: Vic
Number: 9330 2001
Location: Airport West

Name: EFI Hardware
Location: 7 Monomeeth Drive, Mitcham
Number: 9873 5955

Name: Hi End Racing
Contact: Benny
Number: 0406 333 045
Location: 31 Industrial dve. Sunshine, VIC
Hours: 9am to 6pm

Name: Manual Autos
Number: 9466 4499

Name: Racepace
Contact: Ben
Location: 9/6 Holloway Drive, Bayswater
Number: 9762 9421

Name: R E Customs
Contact: Ray
Number: (03) 9548 3414
Location: 16 Yiannis Court, Springvale

Name: Revzone
Location: 3 Varman Court, Nunawading
Number: 03 9878 9299 Fax: 03 9878 9399
Hours: Monday to Friday 9:30 to 5:30 Saturday - Booking Only

Name: Sabbadin Automotive
Contact: Robert Sabbadin
Location: in mulgrave near the corner of springvale and wellington
Number: 9560 3440

 

[SiliconAngel]

There's an auto electrics & performance specialist in Castlemaine too - they were the only ones in Australia willing to take on the loom for my bro's LS1 to a '74 'Vette engine conversion. Can't remember the name off the top of my head, but they're famous around the country apparently.

 

[VR-04-TT]

That wouldn't be Rod Hadfield's shop? Damn straight that's famous lol