ABS Reluctor Ring SOLVED

KeithVR4

Idling at the Lights
Location
Chinchilla Queensland
First Name
Keith
Drive
97 Legnum VR4
I have just found a broken tooth on the front right hand ABS reluctor ring.
I was wondering if there was a local equivalent such as a Magna or Lancer or any other ADM Mitsubishi that would fit?
I have the ABS light coming on as a result and need to get it fixed asap.
Your help much appreciated,
Keith
 

naughtika

OzVR4 Stalker
Location
Brisbane, QLD
First Name
Christian
Drive
'96 Galant VR4, '17 MB A180, '25 Macan GTS
I believe ours are the same as the following models

Nimbus, 93-02 Galant (N/A), Lancer CG/CH and later model EVO's

not sure on Pajero, Triton and Challenger
 
G

Guest

Unregistered
The rings aren't available separately from Mitsubishi, but I have replied to your Facebook message with a possible solution.
 

KeithVR4

Idling at the Lights
Location
Chinchilla Queensland
First Name
Keith
Drive
97 Legnum VR4
I found two replacement ones on Ebay in the UK. Cost me under $25 posted for the pair.
A couple of hours to fit and the ABS and AYC fault lights are now gone.
They are 43 tooth with a 69.95mm internal diameter, slightly wider than the factory ones but there's plenty of room for them to fit.
If anyone has any questions send me a pm

1465872980624-143139407.jpg
 

Paulydee

Idling at the Lights
Location
Lismore
First Name
Paul
Drive
VR4 Leggy FL 1998
Hey Keith

Wondered if you could advise me...
I had a garage swap a pfl engine an Gbox into my fl leggy and now the ABS light is on and brakes not working properly.
Not sure where to start looking to resolve the issue.
Cheers
Paul
 
Top Bottom