Aftermarket Fuel Injectors

[Baba Galant]

Anybody familiar with the Denso 565CC injectors?

Specifications

Fuel Injector - Denso 565cc/min Top Feed - Racing Performance Works

Denso Fuel Injector - 565cc/min Blue Top Feed Short Body

shop.rpw.com.au

• 565cc flow rate at 3bar.
• 12.60 ohms (high impedance).
• Denso type connector.
• Standard 11mm o-ring diameter.
• Short 3/4 Length Injector
• 12 hole pintle with very fine spray pattern for maximum power.
• This is a direct fitment for most Mitsubishi Vehicles without any modifications required.
• These are the perfect fitment especially for Mitsubishi Ralliart Colt, Magna and Galant / Legnum vehicles.

Don't touch them. They're the usual eBay type rubbish. I bought a set last year and sent them straight back.
For about the same money you can fit DW original brand new injectors.

 

[Legnum in America]

Don't touch them. They're the usual eBay type rubbish. I bought a set last year and sent them straight back.
For about the same money you can fit DW original brand new injectors.

Do you have a part number?

 

[Baba Galant]

DW18U-02-0440-6

Set of 6. Best starting and idle I've ever had.

 

[Legnum in America]

DW18U-02-0440-6

Set of 6. Best starting and idle I've ever had.

View attachment 65434

Are these direct fit? Does it come with the right o-rings? Do you need to cut the harnesses?

 

[Baba Galant]

As the DW's are taller you will need to ad in 4 spacers for the fuel rail and grab 4 new bolts extended by the difference in height.

 

[Baba Galant]

Are these direct fit? Does it come with the right o-rings? Do you need to cut the harnesses?

I cut and joined in pigtail plugs to suit. All O rings are perfect.

 

[Legnum in America]

As the DW's are taller you will need to ad in 4 spacers for the fuel rail and grab 4 new bolts extended by the difference in height.

Do you know about what size the spacers were or where you ordered them from?

 

[Baba Galant]

I measured the difference between my old injectors and the DW between o rings and added that in aluminium tube.
That same difference is what I used for the longer bolts.

 

[raj]

Are the Mitsi 3000GT injectors and fuel rail the same as ours?

I use ID1050x series injectors for the 3000gt on almost all my builds, just have to double up on the rail spacers and use bigger bolts