- Location
- Victoria
- First Name
- Gavin Daniels
- Drive
- 2006 Mercedes Benz ML320CDI
Previously Owned
1997 Legnum VR-4 Type S
2000 Galant VR-4 Type V (Race Car) (regretful sale)
Items and prices:
Brembo Brake Setup for Legnum / Galant
$1600 ONO
Condition:
Calipers Used, Brake Lines Used, Discs New, Pads New
Description:
Here is a complete Brembo setup to suit a FL Legnum or Galant. It is everything needed.
- Used Evo 8 Brembo Calipers. Rebuilt with new seals about 30,000km ago.
- High Tensile Umbreko bolts for caliper fittings
- ClubVR4 Braided brake lines made to fit the Galant / Legnum, Complete with required Banjo bolts. - Brand New RDA7626S Slotted Front Rotors 320mm
- Brand new RDA419S Slotted Rear Rotors 300mm
- Brand New ADB Front and Rear Brake Pads
- 1 Litre of Dot4 Brake Fluid
Calipers could do with a sand and repaint, but are fully functional.
RDA boxes got damp at some stage. There is some small surface marks on one of the rear disc hub faces, but the disc it still perfect. All others are still in boxes and in plastic.
The brake lines are all the correct length, with clips for the line holders to suit the VR4. There will be no excess line to tie up as when Evo ones are used.
Wont fit with original rims. You will need at least Evo 6 - 9 or aftermarket wheels. The discs are 20mm bigger than standard VR4 ones. After fitment your space saver spare will only fit on the rear.
Jack up the car, remove the rear disc stone guards, Fit and bleed, and you will be ready to go.
For those with a PFL Legnum or Galant, you just need a set of FL Hub carriers and ABS sensors and they can be fitted with no problems.
Delivery options:
Pickup Preferred, will be heavy to courier
Payment methods:
EFT, Paypal, Reserve Bank Gift Certificates
Contact details:
Forum Message
Location:
Mount Waverley
Photos:
Brembo Brake Setup for Legnum / Galant
$1600 ONO
Condition:
Calipers Used, Brake Lines Used, Discs New, Pads New
Description:
Here is a complete Brembo setup to suit a FL Legnum or Galant. It is everything needed.
- Used Evo 8 Brembo Calipers. Rebuilt with new seals about 30,000km ago.
- High Tensile Umbreko bolts for caliper fittings
- ClubVR4 Braided brake lines made to fit the Galant / Legnum, Complete with required Banjo bolts. - Brand New RDA7626S Slotted Front Rotors 320mm
- Brand new RDA419S Slotted Rear Rotors 300mm
- Brand New ADB Front and Rear Brake Pads
- 1 Litre of Dot4 Brake Fluid
Calipers could do with a sand and repaint, but are fully functional.
RDA boxes got damp at some stage. There is some small surface marks on one of the rear disc hub faces, but the disc it still perfect. All others are still in boxes and in plastic.
The brake lines are all the correct length, with clips for the line holders to suit the VR4. There will be no excess line to tie up as when Evo ones are used.
Wont fit with original rims. You will need at least Evo 6 - 9 or aftermarket wheels. The discs are 20mm bigger than standard VR4 ones. After fitment your space saver spare will only fit on the rear.
Jack up the car, remove the rear disc stone guards, Fit and bleed, and you will be ready to go.
For those with a PFL Legnum or Galant, you just need a set of FL Hub carriers and ABS sensors and they can be fitted with no problems.
Delivery options:
Pickup Preferred, will be heavy to courier
Payment methods:
EFT, Paypal, Reserve Bank Gift Certificates
Contact details:
Forum Message
Location:
Mount Waverley
Photos:
