Dan Bloomfield
Idling at the Lights
Finally got round to my fuel cradle retrofit to an8 feed line and an6 return definitely a tight fit had to move a few things around eg the pump mount as far over to the side as it could go, fit a weld on an8 bung, tack in a few C shape plates to create a flat surface or the bulkhead fittings.
then spent a few hours fabricating a working venturi pump literally by hand out of an8 an6 an4 hardline and the nipple off my factory fuel reg as the jet
then spent a few hours fabricating a working venturi pump literally by hand out of an8 an6 an4 hardline and the nipple off my factory fuel reg as the jet