Found the list of recommended workshops but they are all quite far from me. If anyone knows of a half decent workshop in the tweed or goldcoast area that would be awsome! Doesnt need to be a performance shop just a place that can at least do a proper AYC service.
Gold Coast Workshops
- Thread starter fieldy107
- Start date
godzilla
1 AYC Bar
- Location
- QLD / Tweed Coast
- First Name
- Trevor
- Drive
- 1/19 2002 FL Legnum Type 'S' Manual in Black with Suede Recaro's!
Where abouts do you live?
I reckon i may have spotted you if you ever frequent the Tweed. I saw a FL White Leggie over Sexton Hill a little while back.
I reckon i may have spotted you if you ever frequent the Tweed. I saw a FL White Leggie over Sexton Hill a little while back.
G
Guest
Unregistered
leebutts
1 AYC Bar
Gavin Wood Autotech is near Harbour Town and has been pretty good with my car. I don't know of anyone else, Trev mentioned Nispro, I'm not sure where they are.
cheers
Lee
cheers
Lee
- Thread starter
- #5
Thanks guys If I cant find a shop near Murwillumbah/Tweed heads Ill give Gaving Wood Autotech a go. Going to change the oil today myself thanks to an excellent guide I found on here and gonna throw in a K&N panel filter aswell.
I do frequent Tweed Heads a bit but Ive only had the car about a week now so probably wasnt me?
If anyone else knows of any other decent workshops in my area please let me know
I do frequent Tweed Heads a bit but Ive only had the car about a week now so probably wasnt me?
If anyone else knows of any other decent workshops in my area please let me know
Chris,
you might have to foster one yourself. Start taking your car there on a regular basis and supply them with the "how to's" from this site and Club VR4. Give them feed back on there work, tell them you'll keep coming back if they do a good job and look after you.
you might have to foster one yourself. Start taking your car there on a regular basis and supply them with the "how to's" from this site and Club VR4. Give them feed back on there work, tell them you'll keep coming back if they do a good job and look after you.
- Thread starter
- #7
Yeah that might be the best idea. I just went and asked the local mitsu dealership service center about an AYC service and they seemed pretty puzzled, so we tried reading my cars computer with their machine and it didn't work. So I guess Ill work my way up the coast until I find someone who can read it and go from there.
coops
Crunching Gears
gavin wood did a AYC service on my car, they did a good job, altough it needed to be taken back to blead again, but other then that they did a HUGE service on my legnum, cost me a little, but they did every fluid there was in the car.......
they get my vote aswell
local dealers cant do anything so dont even bother aswell.. tried that route myself
they get my vote aswell
local dealers cant do anything so dont even bother aswell.. tried that route myself
Mortz
Leaving Skid Marks
Gavin wood is a damn good workshop. Charges what he quotes, gets the job done properly and all the staff seem like nice blokes. It's a bit far for me to go for normal servicing but he's good for stuff a bit more complicated.
I usually go to Bedser Automotive in Tweed Heads (Mitsubishi). They service a few Leggy's there apart from mine (and some EVO's) and apart from being a little reluctant to do any major work on the car they have done a good job on all regular services i've got done there such as AT flush, oil/filter change and other little things. Haven't had any problems with them at all, they seem like they know what they're doing, and the prices aren't too bad. I wouldn't ask them to do anything specific to our cars but for regular fluid changes etc they've done a good job and since they're 5 mins from my place they are convenient when i'm working hectic.
I usually go to Bedser Automotive in Tweed Heads (Mitsubishi). They service a few Leggy's there apart from mine (and some EVO's) and apart from being a little reluctant to do any major work on the car they have done a good job on all regular services i've got done there such as AT flush, oil/filter change and other little things. Haven't had any problems with them at all, they seem like they know what they're doing, and the prices aren't too bad. I wouldn't ask them to do anything specific to our cars but for regular fluid changes etc they've done a good job and since they're 5 mins from my place they are convenient when i'm working hectic.
- Thread starter
- #11
Bedser used to have a workshop in Murwillumbah aswell and it had a really bad reputation, being the biggest workshop in town almost everyone I knew had a horror story about them. I still took my lancer for servicing there though as It was under warranty.
Mortz
Leaving Skid Marks
I keep a pretty close eye on the work they've done and they haven't made any mistakes that i've spotted...and i'm pretty fussy 
Note that i'm VERY specific on what I want done though, don't leave them to work anything out really so i leave them little room to stuff up.
Note that i'm VERY specific on what I want done though, don't leave them to work anything out really so i leave them little room to stuff up.
coops
Crunching Gears
they had my car overnight for all the fluid changes (they where busy)
all up it cost me $~400-450 not including most fluids
they did
a/t flush
ayc service
both diffs
transfer case
checked my suspension
engine oil
think that is all, dont quote me on it tho, dont have the recipt infront of me
godzilla
1 AYC Bar
- Location
- QLD / Tweed Coast
- First Name
- Trevor
- Drive
- 1/19 2002 FL Legnum Type 'S' Manual in Black with Suede Recaro's!
Chris
Just do everything YOU can do yourself like transfer case, rear diff, engine oil/filter. You could always wait til the next SEQ home mechanics day and come along to get help with the tricky stuff.
Just do everything YOU can do yourself like transfer case, rear diff, engine oil/filter. You could always wait til the next SEQ home mechanics day and come along to get help with the tricky stuff.
Mortz
Leaving Skid Marks
Yeah i'd do all my simple fluid changes myself if I could get my damn car into the garage. Too much low 
Anyways the next mech day will be a good oppurtunity to get some stuff done.
Anyways the next mech day will be a good oppurtunity to get some stuff done.
Taraska
Leaving Skid Marks
I did my AYC at Gavin Wood Autotech . Nice guy very genuine. Did a good job. He told me about AFM problem and he was right without an tests done to the car.
Taraska
Taraska
Mortz
Leaving Skid Marks
Anyone got anything done at GW Autotech apart from AYC? If so how was his pricing on general mechanical work?
leebutts
1 AYC Bar
They did my clutch and brake lines, I think their labour is 80-90 per hour?
Mortz
Leaving Skid Marks
OK cool, thanks Lee.
