Kenneth
1 AYC Bar
What are the maximum boost / load values people have managed to log? (Would prefer this to be standard turbos and OEM ECU, though obviously tuning is fine)
After my COP, fuel rail loop and injector upgrade I was more than happy to see what the car would do without worrying about fuel and spark delivery issues.
On my way to work this morning:
Gear: 5th
Load (2 byte): 246.563
RPM (2 byte): 3179.69
AFR (wideband): 11.178:1
Boost: > 25psi
The only reason I know that the boost exceeded 25psi is because the boost gauge warning light lit up which made me back off. I am wondering now if boost leaks are a big issue at "high" boost since after doing all the fuel / spark delivery mods I pressure tested up to 30psi.
Obviously the RPM isn't high, next goal is to setup the load limits and targets to see what it will do higher in the RPM range.
After my COP, fuel rail loop and injector upgrade I was more than happy to see what the car would do without worrying about fuel and spark delivery issues.
On my way to work this morning:
Gear: 5th
Load (2 byte): 246.563
RPM (2 byte): 3179.69
AFR (wideband): 11.178:1
Boost: > 25psi
The only reason I know that the boost exceeded 25psi is because the boost gauge warning light lit up which made me back off. I am wondering now if boost leaks are a big issue at "high" boost since after doing all the fuel / spark delivery mods I pressure tested up to 30psi.
Obviously the RPM isn't high, next goal is to setup the load limits and targets to see what it will do higher in the RPM range.