For Sale NZ Modified fuel rails for twin feed

6A13TT TYPE S

3 AYC Bars
Lifetime Member
Location
New Zealand
First Name
Adam
Drive
1999 Legnum VR4 Type S
After doing my Writeup on how to do a parallel fuel system found here..

https://www.ozvr4.com/threads/parallel-fuel-rail-setup.16118/#post-343908

I decided I should offer my modifed fuel rails for sale
20160723_163111[1].jpg
20160723_163125[1].jpg
20160723_163150[1].jpg


Cost is $50NZ + shipping for me to modify your fuel rails to accept the -6AN adaptors.
this does not include fittings. this is just the labour to machine a set of rails.
I can supply you the fittings if you wish at extra cost of aproxx 65nzd but as most people will be buying their preferred brand of fittings for the fuel hose they are using Ill leave this as an extra

I have a few sets of rails already modified ready to go. you just need to send me back your stock rails when you swap them over.
 

6A13TT TYPE S

3 AYC Bars
Lifetime Member
Location
New Zealand
First Name
Adam
Drive
1999 Legnum VR4 Type S
What'll it cost with the fittings?
my aeroflow M18 to -6AN adaptors cost 60NZD with crush washers.

the prices for the rest of the fittings vary wildy in price (and quality) depending who and where you buy them from but the aeroflow ones I bought were 16 bucks each and you need about 10 of them as per the linked thread at the top
 

6A13TT TYPE S

3 AYC Bars
Lifetime Member
Location
New Zealand
First Name
Adam
Drive
1999 Legnum VR4 Type S
Am working on piecing together a bolt in kit including a FPR with mounting bracket and pre made braided lines.

Will be offering normal type fittings and hose or teflon type for those running ethanol blend fuels.

Pricing TBA after i get prices for fittings.

tmp_30472-20161013_171548673670809.jpg
 

6A13TT TYPE S

3 AYC Bars
Lifetime Member
Location
New Zealand
First Name
Adam
Drive
1999 Legnum VR4 Type S
Put together the first kit tonight. Fits great. Just need to make a bracket for the FPR and finalise prices.

Looks like its going to be around the 900NZD mark for a complete ready to fit kit including all fittings, hose, regulator and mounting bracket.

tmp_30257-20161101_2112201294358960.jpg
tmp_30257-20161101_211257-66905915.jpg
tmp_30257-20161101_211325-268688123.jpg
tmp_30257-20161101_211623-1821931425.jpg
tmp_30257-20161101_212731384738336.jpg
 

6A13TT TYPE S

3 AYC Bars
Lifetime Member
Location
New Zealand
First Name
Adam
Drive
1999 Legnum VR4 Type S
Fitted the first kit to my car yesterday. Fits great and looks good. Runs perfect on a stock ecu with the base pressure set at 43psi too. Heres a few pictures of the kit in place on the car. Will get a better shot of the fully assembled engine bay tomorrow with better lighting.

tmp_11427-20161105_212321-85720038.jpg
tmp_11427-20161105_212256618392732.jpg
tmp_11427-20161105_2123312083329196.jpg
 

mezje

1 AYC Bar
Moderator
Premium Member
Location
Melbourne
First Name
Maxim
Drive
1998 Galant VR4 Manual
How did you get the AN to the hard return line?

Struggling to find an adaptor that will work...

EDIT: AF36106BLK (thx Vectose)
 
Top Bottom