NSW New Legnum owner from Sydney

heshan

Idling at the Lights
Location
Sydney
First Name
Heshan
Drive
2000 Legnum VR-4
Some front views :)
 

Attachments

  • IMG_20160116_145716 (1).jpg
    IMG_20160116_145716 (1).jpg
    245.2 KB · Views: 7
  • IMG_20160116_145733.jpg
    IMG_20160116_145733.jpg
    274.1 KB · Views: 8
  • IMG_20160116_145844.jpg
    IMG_20160116_145844.jpg
    248.2 KB · Views: 7
  • IMG_20160116_145905.jpg
    IMG_20160116_145905.jpg
    231.7 KB · Views: 7

TME_Steve

3 AYC Bars
Lifetime Member
Location
NSW
First Name
Steve
Drive
2010 nt did pajero tow car / 2000 6spd gc8 wrx tarmac rally car / 2000 Manual Subaru Outback 2.5 just a car
@Kaldek That's called come to TME for a service.... dedicated 4 post in a wash bay.
 

heshan

Idling at the Lights
Location
Sydney
First Name
Heshan
Drive
2000 Legnum VR-4
Got a turtle headlight restore kit a month or 2 ago and finally got around to doing it.. It definitely improved the situation but one light has a few discolourations from inside so its not perfect but I like it.. No need to buy a new light set yet :)

I would want to try the RAIN-X kit as that seem to have a sealant bottle which is not the case in the turtle kit (I bought the turtle kit as the bloody rain-x was sold out at supercheap!). So every time you use this kit you end up with 80% of everything else with 0% of the selant.
 

Attachments

  • IMG_20150823_112158.jpg
    IMG_20150823_112158.jpg
    320.4 KB · Views: 19

aiwasaki

Leaving Skid Marks
Lifetime Member
Location
NSW
First Name
Azan
Drive
S2 Legnum VR4
Don't want to pull or roll the arches at all. Want to keep this car stock in everyway :)

I think for you if you found a rim with +25 offset you will get the same look as mine.

I raised my car by 25mm as it was rubbing everywhere and it just drove me nuts to hear that sound! I've attached a pic when it used to be quite low..

I had some issues with the rears rubbing, but nothing that a hammer couldn't sort out :)

I can see if I run a wider tyre (currently running 225s) the inside lip of the flares will rub, however I am going to replace the rubber strips at some point, so will grind them back a bit.

Considering these but in +25 offset http://www.stgeorgetyres.com.au/wheels/xxr-530-18-inch-flat-black-wheels/product-detail.aspx
 
Top Bottom