Hey guys,
Today I randomly stopped by JustJap after discovering they are located about 3 minutes from my house! Decided to go in and have a look and ended up walking out with a Blitz Turbo Timer with an unknow harness. Looked at the plug on my Legnum ignition barrel and it looks damn close, only that the blank pin out of the 6 pins is out of place. To me it seems like maybe this harness that came with it is for earlier model Evos and I'm hoping to just re-pin this harness to use it.
So on our ignition barrels there are 5 wire.
Pin 1 - "R" - No connector
Pin 2 - "IG1" - White wire with Black Line
Pin 3 - "AM" - Red Wire
Pin 4 - "ACC" - Blue Wire with Yellow Stripe
Pin 5 - "ST" - Black Wire with Yellow Stripe
Pin 6 - "IG2" - Blue Wire with Red Stripe
Now repinning the harness that I have for the turbo timer should be straight forward, however there are 2 wires that are spliced together.
5 wires in total on the harness:
Red
Green
Blue
White
Yellow
White and Yellow wires are joined together. Does anyone know what pins these wires should go to? Maybe in order for this harness to work properly I need to separate these as they will give power when not wanted, or is there a way to hook it up properly? Any help is appreciated!
Cheers
Blake
Today I randomly stopped by JustJap after discovering they are located about 3 minutes from my house! Decided to go in and have a look and ended up walking out with a Blitz Turbo Timer with an unknow harness. Looked at the plug on my Legnum ignition barrel and it looks damn close, only that the blank pin out of the 6 pins is out of place. To me it seems like maybe this harness that came with it is for earlier model Evos and I'm hoping to just re-pin this harness to use it.
So on our ignition barrels there are 5 wire.
Pin 1 - "R" - No connector
Pin 2 - "IG1" - White wire with Black Line
Pin 3 - "AM" - Red Wire
Pin 4 - "ACC" - Blue Wire with Yellow Stripe
Pin 5 - "ST" - Black Wire with Yellow Stripe
Pin 6 - "IG2" - Blue Wire with Red Stripe
Now repinning the harness that I have for the turbo timer should be straight forward, however there are 2 wires that are spliced together.
5 wires in total on the harness:
Red
Green
Blue
White
Yellow
White and Yellow wires are joined together. Does anyone know what pins these wires should go to? Maybe in order for this harness to work properly I need to separate these as they will give power when not wanted, or is there a way to hook it up properly? Any help is appreciated!
Cheers
Blake