Want your transfer case beefed up with the 10mm high tensile bolt upgrade but don't have the skills/tools/confidence/time to do it yourself by following my guide here?
https://www.ozvr4.com/threads/8mm-to-10mm-transfer-case-bolt-upgrade-plus-lsd-installation.16011/
I'll happily do it for you now.
Ill charge 350NZD to do a case which includes
-Strip
-Wash
-Drill, tap and Helicoil 15 bolt holes
-Supply and fit 19 M10x1.25 12.9 grade cap screws with washers and 15 Helicoils
-Reassemble the transfer case and torque new fasteners to spec
for an extra 50NZD I can split the internals while its apart and install a front LSD if one is supplied to me, or go through the extra work of stripping an LSD case to change the LSD failure prone cap screws for 12.9 grade high tensile replacements same as detailed in my guide above
I won't be supplying seals but if seals are supplied I will fit them for no extra cost.
I won't be bead blasting cases as cool as it looks its too much hassle to do and is a nightmare to clean all the grit out from every nook and cranny for a part which is going to be hidden under the car anyways.
I can do this on Exchange basis. but a 200NZD bond would be required so If you don't return me your stock T-Case after installing the uprated one for whatever reason I can go and source a new one for the next person.
https://www.ozvr4.com/threads/8mm-to-10mm-transfer-case-bolt-upgrade-plus-lsd-installation.16011/
I'll happily do it for you now.
Ill charge 350NZD to do a case which includes
-Strip
-Wash
-Drill, tap and Helicoil 15 bolt holes
-Supply and fit 19 M10x1.25 12.9 grade cap screws with washers and 15 Helicoils
-Reassemble the transfer case and torque new fasteners to spec
for an extra 50NZD I can split the internals while its apart and install a front LSD if one is supplied to me, or go through the extra work of stripping an LSD case to change the LSD failure prone cap screws for 12.9 grade high tensile replacements same as detailed in my guide above
I won't be supplying seals but if seals are supplied I will fit them for no extra cost.
I won't be bead blasting cases as cool as it looks its too much hassle to do and is a nightmare to clean all the grit out from every nook and cranny for a part which is going to be hidden under the car anyways.
I can do this on Exchange basis. but a 200NZD bond would be required so If you don't return me your stock T-Case after installing the uprated one for whatever reason I can go and source a new one for the next person.