Torque Values: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(→Engine) |
||
(5 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
__FORCETOC__ | |||
== Engine == | == Engine == | ||
{| class="wikitable" | {| class="wikitable" | ||
Line 75: | Line 76: | ||
|Timing belt tension | |Timing belt tension | ||
|3Nm | |3Nm | ||
|Accurate measurement requires special tool MD998767 and a Beam style torque wrench | |Accurate measurement requires special tool MD998767 and a Beam style torque wrench.[[File:Tensioner Pulley torque adjustment.png|none|thumb]]This is not a bolt that is tightened, but a belt tension that is held, at which point the timing tensioner pulley bolt is tightened to lock the belt torque at the specific value. | ||
| | |||
|} | |||
== Suspension, Wheels and Brakes == | |||
{| class="wikitable" | |||
|+Suspension and Wheels | |||
!Component | |||
!Torque Value | |||
!Installation Notes | |||
!Removal Notes | |||
|- | |||
|Wheel nuts | |||
|98Nm | |||
|Do it properly, not by counting Ugga Duggas. | |||
| | |||
|- | |||
|Front upper wishbone mounts | |||
|86Nm | |||
|The bolts are located in the engine bay on the strut towers | |||
| | |||
|- | |||
|Front upper wishbone nuts | |||
|57Nm | |||
| | |||
| | |||
|- | |||
|Front upper wishbone ball joint | |||
|28Nm | |||
| | |||
| | |||
|- | |||
|Shock absorber strut tower bolts | |||
|44Nm | |||
| | |||
| | |||
|- | |||
|Shock absorber lower mount bolt | |||
|103Nm | |||
| | |||
| | |||
|- | |||
|Swaybar to shock assembly nut | |||
|44Nm | |||
| | |||
| | |||
|} | |||
== Drivetrain == | |||
{| class="wikitable" | |||
|+ | |||
!Component | |||
!Torque Value | |||
!Installation Notes | |||
!Removal Notes | |||
|- | |||
|Gearbox bell housing bolts | |||
| | |||
| | |||
| | |||
|- | |||
|Transfer case mounting bolts | |||
| | |||
| | |||
| | |||
|- | |||
| | |||
| | |||
| | |||
| | | | ||
|} | |} | ||
[[Category:Reference]] | [[Category:Reference]] | ||
[[Category:Tables]] | [[Category:Tables]] |
Latest revision as of 18:14, 10 May 2022
Engine
Suspension, Wheels and Brakes
Component | Torque Value | Installation Notes | Removal Notes |
---|---|---|---|
Wheel nuts | 98Nm | Do it properly, not by counting Ugga Duggas. | |
Front upper wishbone mounts | 86Nm | The bolts are located in the engine bay on the strut towers | |
Front upper wishbone nuts | 57Nm | ||
Front upper wishbone ball joint | 28Nm | ||
Shock absorber strut tower bolts | 44Nm | ||
Shock absorber lower mount bolt | 103Nm | ||
Swaybar to shock assembly nut | 44Nm |
Drivetrain
Component | Torque Value | Installation Notes | Removal Notes |
---|---|---|---|
Gearbox bell housing bolts | |||
Transfer case mounting bolts | |||