brembo brake lines
- Thread starter minxy74
- Start date
onto FL hubs, yes. obviously you'll needs discs and wheels to suit
iirc, the pads are the same as other evo models
iirc, the pads are the same as other evo models
naughtika
OzVR4 Stalker
Paulie, I think he was just after information for the brake lines
Whoops
Macca
Showing some Leg.
Its pretty cheap to get some stainless ones made up to suit. I got some hel lines from the UK off ebay, search hel braided brake lines Legnum or Galant. 76cm for the front with a banjo fitting and 26cm for the rear with a straight fitting and obviously body fittings on the other ends. That's what I got.
O'Rly? I thought the bolt sizes were different and they had to be heli-coiled etc?
perhaps....the bolt spacing are the same. come to think of it, i think you're right about the hole sizings.
CANDEE
Leaving Skid Marks
He tis.. The Evo 7/8/9 Bolts are M12x35(f) & M10x30(r), The evo 10 is M14x32(f) and M12x30(r).
evo 10 calipers and discs fit onto facelifts no problems (with wheels to fit of course). i dont know about the evo 10 brake lines but i know for a fact evo 7 braided lines fit perfectly onto the vr4 with brembo calipers,
- Thread starter
- #13
