Macca
Showing some Leg.
Items and prices:
All Items are ONO, If you think I have too high a price on something make me an offer
Evo 8 MR Intercooler $100
Front and Rear Rocker Covers $100
Front Roll Stop $10
Injector Rails $40
Clock Top $20
Front Engine Mount $10
Manual Leather OEM Shifter Knob $50
Facelift Hot Side Intercooler Pipe $10
OEM Front Strut Brace $20
Climate Control Unit $40 Each
Gunmetal MMCS Centre Console - no shifter surround $50
Shadow Pro BF 52mm Oil Pressure $100
Stainless Exhaust and Extras $250
Condition:
Evo 8 MR Intercooler - Good.
Front and Rear Rocker Covers - Good.
Front Roll Stop - Worn.
Injector Rails - Good.
Clock Top - Good.
Front Engine Mount - Worn.
Manual Leather OEM Shifter Knob - Fair.
Facelift Hot Side Intercooler Pipe - Fair.
OEM Front Strut Brace - Good.
Climate Control Unit - Good.
Gunmetal MMCS Centre Console - Good.
Shadow Pro BF 52mm Oil Pressure - Excellent.
Stainless Exhaust and Extras - Average.
Description:
Evo 8 MR intercooler - Picked this up ages ago with the intention of installing it but just bought a bolt on kit. It looks to have had a bump on the bottom but hasn't caused any real damage. I polished up the end tanks a while ago, could probably use a re polish or just paint them.
Front and Rear Rocker Covers - Beside being a little dirty these are straight of my engine as when I did my 100k service I put some powdercoated ones on. Great to paint then do a quick swap with your own.
Front Roll Stop - This is my old front roll stop, good to get a new one installed then just swap your own out.
Injector Rails - A bit of surface corrosion like all aluminium engine components. These were off my engine and are spare as I painted a set then swapped them out.
Clock Top - I now have a gauge pod where this was so I don't need it.
Front Engine Mount - The rubber is buggered and will need replaced(I'm also selling a new rubber) but the mount is all good.
Manual Leather OEM Shifter Knob - Normal wear and tear on this but still good or can be reupholstered.
Facelift Hot Side Intercooler Pipe - Normal dirt and what not.
OEM Front Strut Brace - Beside the marks on the silver part this is in good condition, would be good to get powdercoated then swap yours out.
Climate Control Unit - One of the units has a little wear on the fan switch but beside that seem to be in good condition.
Gunmetal MMCS Centre Console - This isn't in bad condition, has a couple of marks as pictured but still in pretty good condition I think and quite a rare colour - shifter surround no longer for sale.
Shadow Pro BF 52mm Oil Pressure - Brand new in box, only opened the box to look at them when I bought them, ended up getting different gauges as I wanted three and needed smaller gauges for the centre gauge pod.
Stainless Exhaust and Extras - There is a bit of a story about this system, was originally a Tanabe system but I had a HKS Hi Power Titanium tip fitted with a straight pipe made up for the track but the place that did it did an average job and I wasn't happy with their work. If you don't mind that then you can run the HKS otherwise you can just run the original Tanabe muffler which isn't a straight through but does sound nice, just wan't loud enough for me.
Delivery options:
I can post the smaller stuff but the bigger stuff(exhaust) may need to be picked up or I am looking at coming to the next Brissy wash meet so I could bring some stuff with me.
Payment methods:
Would prefer Bank transfer but I'll take Paypal too, I'm pretty easy
Contact details:
Just PM me through the forum if you're interested in anything and I'll get back to you ASAP.
Location:
Toowoomba QLD.
Photos:
All Items are ONO, If you think I have too high a price on something make me an offer
Evo 8 MR Intercooler $100
Front and Rear Rocker Covers $100
Front Roll Stop $10
Injector Rails $40
Clock Top $20
Front Engine Mount $10
Manual Leather OEM Shifter Knob $50
Facelift Hot Side Intercooler Pipe $10
OEM Front Strut Brace $20
Climate Control Unit $40 Each
Gunmetal MMCS Centre Console - no shifter surround $50
Shadow Pro BF 52mm Oil Pressure $100
Stainless Exhaust and Extras $250
Condition:
Evo 8 MR Intercooler - Good.
Front and Rear Rocker Covers - Good.
Front Roll Stop - Worn.
Injector Rails - Good.
Clock Top - Good.
Front Engine Mount - Worn.
Manual Leather OEM Shifter Knob - Fair.
Facelift Hot Side Intercooler Pipe - Fair.
OEM Front Strut Brace - Good.
Climate Control Unit - Good.
Gunmetal MMCS Centre Console - Good.
Shadow Pro BF 52mm Oil Pressure - Excellent.
Stainless Exhaust and Extras - Average.
Description:
Evo 8 MR intercooler - Picked this up ages ago with the intention of installing it but just bought a bolt on kit. It looks to have had a bump on the bottom but hasn't caused any real damage. I polished up the end tanks a while ago, could probably use a re polish or just paint them.
Front and Rear Rocker Covers - Beside being a little dirty these are straight of my engine as when I did my 100k service I put some powdercoated ones on. Great to paint then do a quick swap with your own.
Front Roll Stop - This is my old front roll stop, good to get a new one installed then just swap your own out.
Injector Rails - A bit of surface corrosion like all aluminium engine components. These were off my engine and are spare as I painted a set then swapped them out.
Clock Top - I now have a gauge pod where this was so I don't need it.
Front Engine Mount - The rubber is buggered and will need replaced(I'm also selling a new rubber) but the mount is all good.
Manual Leather OEM Shifter Knob - Normal wear and tear on this but still good or can be reupholstered.
Facelift Hot Side Intercooler Pipe - Normal dirt and what not.
OEM Front Strut Brace - Beside the marks on the silver part this is in good condition, would be good to get powdercoated then swap yours out.
Climate Control Unit - One of the units has a little wear on the fan switch but beside that seem to be in good condition.
Gunmetal MMCS Centre Console - This isn't in bad condition, has a couple of marks as pictured but still in pretty good condition I think and quite a rare colour - shifter surround no longer for sale.
Shadow Pro BF 52mm Oil Pressure - Brand new in box, only opened the box to look at them when I bought them, ended up getting different gauges as I wanted three and needed smaller gauges for the centre gauge pod.
Stainless Exhaust and Extras - There is a bit of a story about this system, was originally a Tanabe system but I had a HKS Hi Power Titanium tip fitted with a straight pipe made up for the track but the place that did it did an average job and I wasn't happy with their work. If you don't mind that then you can run the HKS otherwise you can just run the original Tanabe muffler which isn't a straight through but does sound nice, just wan't loud enough for me.
Delivery options:
I can post the smaller stuff but the bigger stuff(exhaust) may need to be picked up or I am looking at coming to the next Brissy wash meet so I could bring some stuff with me.
Payment methods:
Would prefer Bank transfer but I'll take Paypal too, I'm pretty easy
Contact details:
Just PM me through the forum if you're interested in anything and I'll get back to you ASAP.
Location:
Toowoomba QLD.
Photos: