For Sale NSW Wrecking 98 PFL manual Legnum - Meister Blue

vr4ssz

Leaving Skid Marks
Location
NSW
First Name
Shane
Drive
98 PFL Legnum VR-4, 2005 VZ SSZ, 1991 Cressida (1jz converted)
Do you have the driver side rear suspension arm/knuckle and if so how much?
 

NOXQSZ

Hesitantly Boosting
Location
NSW
First Name
Pauly
Drive
Hopes n dreams
Hi guys, sorry about the delay, been moving so a bit busy with that. The manual box and everything for conversion is sold pending payment - including rear diff/AYC.

I'm open to taking offer on the rest of the car as a whole (pretty much complete minus suspension and a few small bits).
 

Smurph

Leaving Skid Marks
Lifetime Member
Location
QLD
First Name
Symond
Drive
1997 VR4 Galant PFL
Hey mate, I'll be coming down from Sydney on the 5th of Jan, any chance I could drop in to get those door cards
 

NOXQSZ

Hesitantly Boosting
Location
NSW
First Name
Pauly
Drive
Hopes n dreams
PRICES DROPPED ON ALL PARTS




Front bar SOLD


Front nose grill was $80 now $50


Strut brace was $110 now $80



Drivers side (Damaged) and passenger side side skirts was $100 now $60



Complete MMCS, stacker and wiring was $500 now $350



CF center console and gear shifter surround (Has small crack top right - separated for photo - but not noticeable when fitted) was $120 now $70


Washer bottle was $30 now $15



Headlights were $200 each or $350 for both, now $120 each or $200 for both



SAAS Mechanical boost gauge in coin holder was $60 now $30



Spare cheese cutter - good tread (Off S15) $20


Driver side boot compartment $10


Boot panels $5 each or 3 for $10


Boot floor and side panels $30



Boot privacy screen $50


Tow bar $250





Door cards $50 each or $175 for 4 (Fronts have Kenwood tweeters on door card)



Turbo back exhaust (No muffler - I think it's standard - looks like 2.1/4") was $120 now $50





RalliArt Muffler was $150 now $100



XForce Muffler was $120 now $80



Brake lights (RHS has white scuff mark from sitting at assessor's, should come off with degreaser or similar) $40 each or 2 for $60



Side mirrors complete with interior trim and tweeter (Both motors fine) passenger side Meister Blue, drivers side is the mauve colour were $60 each or 2 for $100, now $50 each or both for $80



Handbrake cover (Very slight fading on top of leather grip) SOLD


Jack SOLD


Intercooler and piping - SOLD PENDING PAYMENT


Radio convertor $10



Kenwood speakers $30


Complete motor w/turbos (135,000kms - I'm fairly sure 100k has been done. Will check paper work/receipts and update shortly) was $1500 or $1200 if you come remove it, now $1000 if you pull it out



Rear bar (Damaged as pictured) was $40 now $20



Tein shocks SOLD







18" multi-stud rims with great rubber but slight marks on wheels as pictured (All 80%+ tread, have 3 centre caps to go with them) was $550 now $400



16" Speedy rims with shit tyres and gutter rash (Purchased to move car around) was $200, now $150

Front cloth seats SOLD

Rear cloth seats were $80, now $50

Set floor mats were $50, now $30

Front left panel was $180, now $120

Bonnet (Has CF sticker - not sure if needs to be repainted underneath) was $150, now $100

4 x doors and windows (Rears tinted dark - no skins or interior handles) were $150 each or 4 for $500, now $100 each or 4 for $360

Rear cargo windows (Dark tints) $100 each or 2 for $180

Complete hatch with skin and spoiler was $350, now $250

E.O.I for the gearbox / conversion let me know via PM. Had someone interested but they may be pulling out.

Also if anyone is interested in buying the whole vehicle as is (Minus only a few parts) PM me. Can work out a deal.
 

Unco_Tomato

Leaving Skid Marks
Lifetime Member
Location
Avalon, NSW
First Name
Matt
Drive
1996 White Manual Legnum w/ FL Kit
I'll take the front bar.

I can pick up on the weekend. I might take front seats and floor mats too if they are already pulled out and pending condition.
 

NOXQSZ

Hesitantly Boosting
Location
NSW
First Name
Pauly
Drive
Hopes n dreams
Hard pipes sold.

Bonnet, headlights, radiator, intercooler and diff sold pending payment.

No one needs doors, widows, trim or a decent motor? Gearbox is still available!
 

vr4ssz

Leaving Skid Marks
Location
NSW
First Name
Shane
Drive
98 PFL Legnum VR-4, 2005 VZ SSZ, 1991 Cressida (1jz converted)
have you got the driver side rear knuckle/arm?, also may be intrested in bonnet as mine is faded.
 

AKKO

2 AYC Bars
Lifetime Member
Location
WA
First Name
Chris
Drive
1998 Galant VR4 Type-V (Facelift)
Passenger side drive shaft available?
Also interested in the guard for the same side if same as FL...
 

vr4ssz

Leaving Skid Marks
Location
NSW
First Name
Shane
Drive
98 PFL Legnum VR-4, 2005 VZ SSZ, 1991 Cressida (1jz converted)
bump on knuckle and bonnet
 

Gt_Galant

EC5A
Location
New South Wales
First Name
Fred
Drive
Galant
Guys if your 100% keen on his items
this is his ad :
http://www.gumtree.com.au/s-ad/syde...nual-mitsubishi-legnum-prefacelift/1036472124

Sorry mod's if im not meant to post his ad but incase people are urgent - they can give him a call directly, i know when i picked up some stuff off Pauly (Nice Bloke) he was busy so maybe a call/SMS is better/faster.
I dont wanna post his number here but that gumtree ad has a contact number for those that need parts urgently.
Hope its okay,
 

NOXQSZ

Hesitantly Boosting
Location
NSW
First Name
Pauly
Drive
Hopes n dreams
Sorry for the delay guys, been a bit hectic lately. Quite a few items sold, I'll post a further update this weekend.

PMs will all be replied to today, basically be getting quotes for everything that needs to be posted this weekend.

Cheers for the help Fred, all good about the number. It's 0402244828.
 

ersanalamin

Leaving Skid Marks
Location
Indonesia
First Name
Ersan Al Amin
Drive
Year 2000 EA5A => FL EC5A
Hi Pauly,

is it all ABS speed sensor in good working condition? is it available for sale?
 

jungle

3 AYC Bars
Lifetime Member
Location
QLD
First Name
Simon
Drive
1 PFL & 1 FL Legnum
Hi Pauly,

Mate I'll take the zircon condenser core if you still have it??

Cheers
 

Macca

Showing some Leg.
Location
Toowoomba, QLD.
First Name
Craig 'Macca' Mclean
Drive
2000 Mitsubishi Legnum Type S
Hey mate, do you have the plastic part that goes where that silver box is in the picture below?

Boot.jpg


What sort of condition is it in if you have one?

EDIT: Actually, do you have the one that goes on the other side too?
 

NOXQSZ

Hesitantly Boosting
Location
NSW
First Name
Pauly
Drive
Hopes n dreams
Hi Pauly,

is it all ABS speed sensor in good working condition? is it available for sale?

As far as I know it was working fine while I was driving, car hasn't moved since. It is mate, can you come past?

Hey mate, do you have the plastic part that goes where that silver box is in the picture below?



What sort of condition is it in if you have one?

EDIT: Actually, do you have the one that goes on the other side too?

I have both from memory, both in fine condition - just injection moulded plastic and neither had any damage as far as I'm aware. I'll confirm this weekend that they're still there. Same thing mate, come past if you can.

Guys I'm offering the rest of the vehicle or part of (motor/gearbox/conversion or anything else) up for a part or whole trade if you can come up with something of interest. Willing to consider a sports ATV (Raptor 450/700/banshee), full frame DSLR, double din DVD with NAV/Bluetooth or if you're a mechanic that's familiar with Mercedes ML series, might be able to work something out with cash either way. Cash either way dependant on item and condition. Anything else let me know. Contact me on my number above as you'll get the quickest reply.

Thanks
 

Macca

Showing some Leg.
Location
Toowoomba, QLD.
First Name
Craig 'Macca' Mclean
Drive
2000 Mitsubishi Legnum Type S
Hey mate, I live in Darwin so you would have to post them up to me if that's ok. I don't suppose you have the cup holder that is in the centre console, the one between the driver and passenger?
 

trotty

3 AYC Bars
Location
nsw
First Name
Daniel Trotman
Drive
2000 vr4 Legnum 5 sp man
2006 Suzuki Swift Sport 5 sp man
What do u plan on doin with the shell? I could use the front cut firewall forward. Pm me a price.
 
Top Bottom