Rex Everything
Leaving Skid Marks
Hi guys,
As the "all stupid questions/too lazy to search" thread has been closed and I can't seem to find anything I thought I would start a new thread here.
The other week I reversed out of my driveway, got a about two houses away and noticed all 3 AYC bars were lit up!!! Awww bugger, I turned the stereo down and heard a gut wrenching sound coming from the back end, cancelled my dinner plans and limped back into the driveway.
After checking for seized callipers or busted wheel bearings I "solved" the issue by removing the AYC fuse and the noise was gone, car drove fine. So I'm asssuimng it's something AYC and electronic.
Took the car in to get diagnosed today and they weren’t too much help but gave me the read out below which has the steering sensor at 508 degrees right! The angle speed was working when moving the wheel.
The guy who looked at it wasn't too sure about Legnums or even Evo's despite what the service manager told me. Basically he wasn't sure if it's because the computer wasn't picking it up correctly or because the sensor was in fact rooted. They gave me the following part number MB863853 for a new sensor $300 ordered from O/S and went on my way not really any much more the wiser.
So basically I'm turning to you guys to see if anyone is familiar with the issue, could it be the steering sensor, how do I go about diagnosing/resolving this issue because I would really like my AYC back!
As the "all stupid questions/too lazy to search" thread has been closed and I can't seem to find anything I thought I would start a new thread here.
The other week I reversed out of my driveway, got a about two houses away and noticed all 3 AYC bars were lit up!!! Awww bugger, I turned the stereo down and heard a gut wrenching sound coming from the back end, cancelled my dinner plans and limped back into the driveway.
After checking for seized callipers or busted wheel bearings I "solved" the issue by removing the AYC fuse and the noise was gone, car drove fine. So I'm asssuimng it's something AYC and electronic.
Took the car in to get diagnosed today and they weren’t too much help but gave me the read out below which has the steering sensor at 508 degrees right! The angle speed was working when moving the wheel.
The guy who looked at it wasn't too sure about Legnums or even Evo's despite what the service manager told me. Basically he wasn't sure if it's because the computer wasn't picking it up correctly or because the sensor was in fact rooted. They gave me the following part number MB863853 for a new sensor $300 ordered from O/S and went on my way not really any much more the wiser.
So basically I'm turning to you guys to see if anyone is familiar with the issue, could it be the steering sensor, how do I go about diagnosing/resolving this issue because I would really like my AYC back!