Part Number needed ASAP

Discussion in 'General Technical Discussion' started by takumi, Jul 26, 2007.

  1. takumi

    takumi Guest

    Well the long wait for the Leggy came to an end this week as the it arrived safe and sound. Hit the registration this morning and struck a bit of hurdle. My cars front right wheel was loose, but not just the wheel the whole fittings were loose. Basically its the Ball Joints on the control arm and Castor arm. So I need new ones. I really need someone to find the Part numbers for me as Mitsubishi Australia (well the place near me) doesn't have access to the Part numbers (yeah right)
    Please email me on Log in to view or contact me in msn if u have access to the part numbers.

    Cheers guys.
     
  2. snickells

    snickells I was driving a VR4 when your mum was still hot Lifetime Member

    Joined:
    Jul 13, 2007
    Messages:
    3,056
    Likes Received:
    23
    Location:
    Victoria
    First Name:
    Steve
    Drive:
    Prado 4x4
    BRAD, GLY, HELP THIS POOR MAN!
     
  3. MR296295 + MR296296 for lateral arms and MR296293 + MR296292 for the compression arms
     
  4. jmo

    jmo Guest

    LegnumFrontEnd.jpg

    ???? this is taken off caps, but is differnt to what peter says?
     
  5. If you click on those numbers on that page the part number will be shown in the part number list at the start menu. Those are just reference numbers of some kind rather than the part number
     
  6. takumi

    takumi Guest

    Thanks guys thats great ... the guy at mitsubishi sent me the same picture u have on there but from the 7th gen galant ... So Peter are they the part numbers for the whole arm ? I'm told the ball joint is sealed into the arm ... there is 4 part numbers there, what do they refer to ...
    I really appreciate this guys !! ur saving my life ....
     
  7. bradc

    bradc 1 AYC Bar

    Joined:
    Jul 13, 2007
    Messages:
    8,253
    Likes Received:
    60
    Location:
    New Zealand
    First Name:
    Brad
    Drive:
    Facelift Manual 400hp VR-4 Legnum
    nice one Peter :)

    Paul - the 4 part numbers are the individual arms that you may or may not need.
     
  8. Gly

    Gly Guest

    these are a parts that were part of a recall..

    may to check if your cars was one of those recalled??
    and if the work had been done... you may get the parts/labour free thru mitsi.
     
  9. newman

    newman Guest

    can someone put the caps program on here so we could download it!
     
  10. Added which part number corresponds to which side of the car
     
  11. jmo

    jmo Guest

    So was the pic i posted right? i just want to know if caps is worth while or not?
     
  12. Yes its the right picture
     
  13. takumi

    takumi Guest

    Great work fellas, thanx heaps, the parts come to a total of $750 ... thats both arms on the right side of the car. mitsubishi says about 4-5 weeks, so I'm waiting to hear back through Prestige if he can get it cheaper and quicker. Hopefully soon
     
  14. Kristian

    Kristian Leaving Skid Marks

    Joined:
    Jul 22, 2007
    Messages:
    1,278
    Likes Received:
    0
    Location:
    SA
    First Name:
    Kristian
    Drive:
    Changes daily
    Get in touch with Mitsu NZ - takes 10 days.
     
  15. snickells

    snickells I was driving a VR4 when your mum was still hot Lifetime Member

    Joined:
    Jul 13, 2007
    Messages:
    3,056
    Likes Received:
    23
    Location:
    Victoria
    First Name:
    Steve
    Drive:
    Prado 4x4
    Why not try kempy's too? Either way, like the chef said anywhere in NZ will be faster than getting it from Japan.
     
  16. jmo

    jmo Guest

    NZ for sure, 4-5 weeks is not a good option
     

Share This Page