Hi guys, just wanted to share with you the detail i am getting at the moment.
Here is the post from VIC by my detailer.
Here is the post from VIC by my detailer.
.Ryan. said:This is a work in progress. I have it for tomorrow as well, so I was able to spread the detail out more, take my time and get more photos then with Ash's Chaser.
Completed so far:
- Thorough wash
- Clay Bar Decontamination
- Masked Up
- Paint Correction step 1, medium cut on light cutting pad.
Still to do:
- Paint Correction step 2, Sub 1 Micron Jewelling polish on Ultra Fine polishing pad
- Thorough Cleansing wipedown
- Polymer Sealant application
- Engine bay plastics cleaned and dressed
- Interior Vac'd, Dusted, and Dash dressed with Polymer Treatment, and an attempt at removing a stain on the Recaro drivers seat.
Before photos:
FI Power Wheel Cleaner dwelling on the wheels, FI General Purpose Cleaner dwelling on the tyres and Calipers.
Some 'before' shots of the paint condition, under 3 different light sources, 500W Halogens, External Flash unit for my dslr, and the Sun.
Some deeper swirling:
After 1-2 passes of Final Inspection CAP Medium on FI Orange Light Cutting Pad:
Starting to look more like a mirror again:
You can see how much stuff I use in a detail in this photo. probably 75% of it in picture.
Roof reflecting in the roof :lol:
How it sits atm awaiting completion tomorrow.
Basically the paint is now 90% swirl free, at least I think it is, will confirm that in the sunlight tomorrow morning. Tomorrow is about getting getting rid of the holograms left by the cutting stage, and polishing up as much Gloss/Depth as possible out of the paint. Then Sealing it in Looking forward to finishing this one, looking sweet so far.
To be continued.....