What did you work on today?

[Cameron McPherson]

Still working in my engine swap:

Replaced inner and outer tie rods + boots
Cleaned and re-greased steering rack
Moved rear turbo and heat shields to new engine.
Removed clutch and flywheel from old engine - realised I would probably need new flywheel bolts.
Degreased engine bay.
Replaced LHS upper suspension arm thingy.
Replaced Turbo-Dump and exhaust manifold-turbo gaskets.

 

[Interloper]

new alternator, oil, filter, front engine mount and wiper blades

 

[mookers]

Changed the oil in the Leggie last week. Discovered the rear rocker cover is leaking

Fixed the clock again last night - different solder joint this time. Eight years ago I re-soldered one of the connector plug mounts. This time it was one of the connections from the button panel ribbon.

 

[Kaldek]

Fixed the clock again last night - different solder joint this time. Eight years ago I re-soldered one of the connector plug mounts. This time it was one of the connections from the button panel ribbon.

Time to replace it with a UTCOMP then.

 

[GMan]

Changed my transfer case oil on the weekend...so so simple

 

[TME_Steve]

cleaned underneath a car.

View attachment 45760

 

[Kaldek]

Yesterday, but fitted a fuel pressure sensor that is monitored by my UTCOMP.

 

[Gav]

Picked this up today.

And for the bad one

 

[Nitephyre]

Where'd it get brought from?

 

[Gav]

Where'd it get brought from?

Who's that directed too??

 

[Gav]

So we started stripping the doner car today to get ready for my manual conversion that's planned to be done in the next 3-4 weeks

 

[GVR40]

found the cause of my overboost issue today, the restrictor in the vac line from the intake pipe was blocked solid with dirt, replaced the hose and no more overboost

 

[Kaldek]

Lubricated my clutch pivot fork again as it had started squeaking. I swear when @TME_Steve finally gets this box off to mount to the new motor he's gonna see White Lithium grease spooge everywhere.

 

[marc mtp]

New plugs today so whilst the mani was off gave it a little buff

 

[Cameron McPherson]

Made the most of the public holiday today up here in Qld.

Installed 2/3 hard pipes I got off @pretzil's donor car. Unfortunately having some fitment/clearance issues with the cold side pipe due to aftermarket radiator hoses.

Also installed my eBay spec front lip.

 

[Grey_Ghost]

Passed the 1000km mark with no issues bar the oil leak. I'll be making a second attempt at rectifying it this weekend.

Started going through and replacing all the blown globes with LEDs this evening. Had one ping off into a parallel dimension...

 

[Gav]

Finished stripping the gearbox and motor out of the spare car.. Next step strip the auto out of my galant and put the manual in.

 

[rockerpeller]

Not today, but over the weekend I managed to get the lifter tick out of the engine bay. Awesome guide here helped sort it all out pretty quickly. Now to sort the minor boost leak

 

[6A13TT TYPE S]

Nearly finished collecting all the bits I need to do my manual conversion / cams / engine mounts / cambelt / fuel system

 

[Kaldek]

Nearly finished collecting all the bits I need to do my manual conversion / cams / engine mounts / cambelt / fuel system

View attachment 45979

I am jealous of how clean your gearbox is.