Where does this go?

[Legnum in America]

I found two plugs that were disconnected behind the master cylinder but I don't see any place that they actually plug into.

 

[6A13TT TYPE S]

The grey/round plug goes into the side of the brake fluid reservoir.
The blade terminal i dont recall off the top of my head but maybe its for heated windcreen models?

 

[Legnum in America]

The grey/round plug goes into the side of the brake fluid reservoir.
The blade terminal i dont recall off the top of my head but maybe its for heated windcreen models?

There's already a harness inside that plug on the brake reservoir

 

[6A13TT TYPE S]

Huh. Well im not sure then.

 

[BCX]

Will check wiring diagrams when i get home.

 

[BCX]

I just checked my Galant, they dont exist.

My VR4 matches these diagrams attached. A-46 doesnt exist as it appears to be for the gdi.

Are they part of the loom that comes through near the strut tower (pictured) or part of the engine loom?

 

[Legnum in America]

This is very interesting, I have four plugs coming out of the harness. Two go into the master cylinder/brake reservoir. I believe the black blade one is for the de-icer, which is an option I have but no where to plug into. Not sure about the grey round plug though.

They come through the strut tower

 

[BCX]

Window de-icer is a 2 pin black plug (A-03)

On my Galant, this connector is near the master cyl and then goes into the windscreen plenum.