What's happening!
I get err codes 12 and 52. 12 = FL wheel sensor and 52 = is Valve Relay "stays off".
Engine turns but doesn't start - like an Immobilizer fault, except that there is no err code for that.
Relay check showed it to be ok....
Fuse is ok.
Haven't checked the 12 as yet.
At no stage the Workshop Manual (WM) indicates anything about inability to start the engine if one has ABS fault - on the contrary, WM advises one to pull out the fuse if driving is required.
Baffled! :001_mad:
I get err codes 12 and 52. 12 = FL wheel sensor and 52 = is Valve Relay "stays off".
Engine turns but doesn't start - like an Immobilizer fault, except that there is no err code for that.
Relay check showed it to be ok....
Fuse is ok.
Haven't checked the 12 as yet.
At no stage the Workshop Manual (WM) indicates anything about inability to start the engine if one has ABS fault - on the contrary, WM advises one to pull out the fuse if driving is required.
Baffled! :001_mad: